Result: 25 1/2 leaf spring

I have 2 Dexter 7000lb. Axles with 25-1/4inch 6 leaf springs. With 8 hole hubs what size tire | I have 2 Dexter 7000lb. Axles with 25-1/4inch 6 leaf springs. With 8 hole hubs...

inches bolt to bolt and 2 1/2” wide, | Hello, the tire that I ordered code number TTWA14RWS, it currently does not fit the hub that is on my trailer I want to know if I can get a different hub that will fit...

only have about 2 and 1/2 inches of clearance. Will the taskmaster 235/80 r16 fit within the same space | I have 225/75 r16 on my travel trailer right now with slight weigh sitting on them. It looks like I...

. Measurement A-11-3/16", B-22-11/16", C-24-5/8", D-12", E-14-1/2", F-3-1/2" the spring is also 1-3/4" wide | Hello, i have a boat trailer im trying to repair and im not sure...

, then you will space your axles 29-1/2 inches on center and use the 3-Leaf Double-Eye Spring # e84SR | I bought a used trailer a few years ago with tandem axles that has 4.80x12 tires. Frame...

# TTWTR21514 tire that has an outer diameter of just under 27 inches and is 8-1/2 inches wide. It has | What good is this chart when changing from single axle to a tandem setup or building a trailer? I have two D35 Dexter...

is homemade made in the late 1970s. It has a 2,500 pound axle with 30 inch 4 leaf slipper springs | I bought a light 16 foot aluminum boat 260 pounds with a 15 hp motor 95 pounds. The trailer...

on the size you want and the bolt pattern. For 7k axles I'm assuming your hub assembly has an 8 on 6-1/2 bolt | building a new trailer i have the axles need tires and spring kit. wheel and tires for dual axles rate at 7000...

and 02475 outer bearings, and that the grease seal spot on the spindle works with a 2.25" ID seal and you'll | I am going to replace the axles and suspension on my gooseneck tandem axle trailer, but I am having trouble finding...

/4" Front, 1-1/4" Rear # APS4 along with the 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1 | Dear Sirs, I am interested in upgrading my Harbor...

that keeps the higher load range at least 2500lbs per tire ? And will a 1 or 2inch block add too much | Ive got a PJ trailers B5 buggy hauler with 5200lb Dexter axles. The problem Im having is the I dont have...

The Mazda 6 lug bolt pattern is 6 on 5-1/2 inch like what our trailer wheels have. We have the part | I want to upgrade my Redco sportsman trailer to take a quintrex hornet up north. I want to match wheels to my Mazda BT50 16inch...

/ 13" White Spoke Wheel - 5 on 4-1/2 - LR C # TA43RR has a 5 on 4-1/2 inch bolt pattern, and has | Im seeking information on a1992 Coleman Destiny Royale. I would like to put one of your over/under lift kits...

as the wheel is 6 or 6-1/2 inches wide. An ST205/75R15 tire will be about 1.2 inches shorter in overall | I have a 40ft/9000lbs when empty trailer that I need to put tires on but the standard 225/75/15 and...

but that tire is 7.2" wide so you'll be 1" close to your trailer frame. If you have that sidewall clearance | Im just trying to figure out the largest or sizes I can get up to with this trailer linked below....

, My hitch can go down one more Inch in height but I only have 6-1/2 inch clearance at the moment. I | I have a 2018 wildwood Heritage Glen 286RL the back of the trailer is 5 foot lower then the front, My hitch can go down one...

and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs item # 42866UC3-EZ. The hub | Hello. I am looking for some spare parts for RV Jayco Recon ZX M-39 A, 2009 year, VIN 1UJCJSCVXA1AA0076. They...

that includes a 5 on 4-1/2" hub pattern for 13"-15" wheels. The axle is rated for 2,000lbs. This may be higher | Do you sell complete axle assemblies for a 5x8 utility trailer? Spring eyes are 22inch Axle...

leaf spring. I believe i have a 2,000 pound axle and cant tell as the axle is so rusted over. I | Hello, I have a jet ski trailer that I have converted to a utility trailer. It has 3 leaf...

but the increased diameter will leave me with just 1inch of spacing. Will putting 7,000 lb, e64SR leaf springs | On my fifth wheel trailer I have tandem 6,000 lb Dexter axles with 33inch spacing....

) measurement. We do have the CE Smith Trailer Axle # CE33201GA-HUB, which has a 57-1/2" HF measurement | I have a single jet ski trailer that I’m converting for use with a fishing kayak. The trailer is galvanized and has a...

. In addition to the dual Dexter axles and 1-3/4" leaf springs like the 4-Leaf Double-Eye Spring for 3,500-lb | I have a 12 foot utility trailer. I will be...

has an 8 on 6-1/2 wheel bolt pattern. The brakes I recommend for this assembly is part # 23-105 | I am looking for a complete axle with a 4inch , leaf spring, 5500 lb., shackles, and electric brakes. The bolt pattern is...

the tires to a different size so they can be 2 inches taller and possibly wider .what size do you recommend? | Hi I currently have 235 80 16 on my 5th wheel.i plan on lifting my truck so I would like to upgrade the tires to...