!Designer Camper  x   >   !Verona Motorhome  x   >   1974  x   >  

hi a have a 74 dodge sportsman a want to haul my tamdem boat around but the motorhome didnt come with any trailer wiring. I have a tekonosha voyager brake controller off another vehicle and need to know the wiring from scratch thanks | We have...

This product: The Club Tire Claw XL Wheel Lock with Lug Nut Protector Plate Item # WI491-491LNP If someone were to cut thru the bar where the lock is, would the arms be easily opened? Im just wanting a quick wheel lock for my vintage vehicle...

Hi, Im interested in a tow hitch for a 1974 Ford Ranchero. Can you tell me if you make one and what the product number is? Many thanks, Lock | Unfortunately we do not have a trailer hitch confirmed to fit a 1974 Ford Ranchero so you would have...

The install went perfect but on my 74 Ford Truck when I press the brake the turn signal stops. and when the head lights are on the turn signals wont work. What can I do? | I recommend checking the grounding wire on the Hopkins Plug-In Simple...

Hello, I have been searching and searching and I cant find an accurate answer to my specific needs. Will you please link me to the products I need for a 1974 Chevy C10 - Shortbed - with a roll pan - I am looking for a hidden hitch that will...

Need hitch 42 inch from frail to frail rail Body is crusader shuttle bus | For a Crusader Shuttle Bus, there is not a custom-fitted hitch, so a universal hitch will be the way to go. A good weld-on hitch is the Class V Curt, part # 15901. This...

what is the difference between GTW and TW | In the trailer world GTW stands for Gross Trailer Weight, and TW means tongue weight. Gross trailer weight is the entire weight of the trailer and tongue weight is the amount of vertical load that...

I have a 1974 Toyota class C RV with duel wheels. It looks like part # F2445 will work, but I need the dimensions: Height, and Width to make sure before buying, because the 74 model is smaller than the Tundra. | If your 1974 Toyota Class C...

Is the LaSalle Bristol RV Sewer Termination Adapter - 3 inch Lug Fitting to 3 inch, Item # 34466V293B3S, made to glue into a 3inch female fitting? male sewer hose connector to male ABS pipe | Yes, the LaSalle Bristol RV Sewer Termination Adapter,...

What do all of the wires on this controller do? | That is a great question! I reached out to my contact at Furrion and the wires of the Replacement Single Zone Controller for Furrion Chill RV Air Conditioner Setup # FACC12SA-BL have a few different...

How many GVWR is this 13403 cooler designed for? | According to the folks at Derale, their # D13403 transmission cooler would be expected to handle a GVWR up to 26.500 lbs. Keep in mind, these coolers work best as a supplement to the existing...

Will this towbar work for my landcruiser, behind my 2011 Fleetwood 32BH Storm? My FJ40 bumper has a big flat face, so mounting the actual bracket will be easy. thanks in advance | There is a flat towing solution, but if there was a Roadmaster...

Frame for 1974 Sportster is 5-5/12 inches. The Biker Bar that I received would only close down to 8 inches. Already sent it back so the question is. Can I get a bar that closes down to 5 inches? | With the frame of your 1974 Harley Davidson...

I have a 1974 jeep Cj5 with the original top, with this replacement top will i need to mount a new striker lach for the door to close? The top i have now has a rod that runs up and down inside a sleeve in the top and the handle on the door...

Does anyone have an adapter from 7 round pin to 7 blade or RV socket? | We can help you with that! If the vehicle has the 7-way flat blade, you can use the Adapter 7 Way (Blade) to 7 Way (Round Pin), part # 47595. If your vehicle has the 7-way...

Can I keep the spare tire in it stock location with your class 5 hitch, 1974 chev pickup stepside? Thanks | I have looked at the instructions for the Draw-Tite Ultra Frame Receiver hitch, which state that the spare tire carrier will need to...

ON A 1974 SPITFIRE. replacement size | The modern metric equivalent to tire size A78-13 is going to be a 175/80-13. You won't be able to use any of the tires we carry though because they are for trailer use only. There is a difference between...

I have a 2019 Jayco Octane T30F. I purchased a Furrion, FCE48TASL-05 from Etrailer and have the side lights wired to my old marker lights. The power light appears to be the marker light and directional. When I put either directional signal...

Will this trailer hitch fit a 74 K5 Blazer that has the OEM steel gas tank shield? | The Draw-Tite Max-Frame Trailer Hitch Receiver 75129 should fit with any OEM parts but just to be used I went out to the warehouse and measured the hitch. From...

I have a 1974 F250 4x4 with the 34 inch frame and need a class IV hitch. Guys online say a Curt 14082 bolts right up but application here says no. Please advise. Thanks in advance. | The Curt # C14082 will fit on your 1974 Ford F-250 as long...

Hello I was wondering which product number I needed for my 1974 Chevrolet c10. I ordered part number 75500 because it said it fit this model but then trying it, it seems to hit a rivet on frame and doesn’t line up. Also hitch is at angle and...

You said the CM45000 has a glass mirror thats high quality. Is the CM94500 also a high quality glass mirror? | The Replacement Mirror Head for CIPA Universal Door Mount Mirror - Stainless, part # CM94500, does appear to be glass. We have not...

I’m installing these Leds lights on my 1974 corvette, they have four wires a red one for brake light, a green one for running light, a yellow one for turn signal and a black wire as ground. How would I wire them to work correctly? I have a...

I have a 74 cj 5 jeep and the jeep in pic is a lot newer just want to make sure that it will fit since i have an angled roll bar and it dosent have the piece from roll bar to windshield on each side | Yes, the Rampage California Brief for Jeep...