!Designer Camper  x   >   !Jetta New Body  x   >   1963  x   >  

I read a cusomers question about installing Dexstar wheel am20504 on an AMC Rambler. The expert responded that normally trailer wheels are not placed on vehicles but that line of wheels were an exception. Is that also true of Dexstar am20304?...

Can one put a 245/75 R16 tire on your 16x6 trailer wheels? If not, what is the minimum for that size tire? | A 245/75 R16 tire can indeed be used on a 16x6 inch wheel like the # AM20741 you referenced. |

What is diameter of the plug | In the attached picture I have indicated all of the different dimensions of the Pollak 2-Pole Trailer Wiring Connector, part # PK12800. The diameter of the face of the connector where the two plugs are located...

I purchased two complete axles from you, I can not find one of the grease seals for the non braking hubs. Can I get another or at least get the correct part number from my records | Thanks for the info! Looks like you got the Dexter Trailer...

I have a 1953 Chevy 3200 pickup with a tailgate pan and Im looking to put a rear bumper and trailer hitch on it. Can you give me the dimensions on the 13208 receiver drawing I attached. The height from the top of the end brackets to the receiver...

Hello, I have a 1984/85 Car -Mate 4x8 enclosed trailer. The wheel bearings have not been done as far as I know. I would like to replace the complete hubs and wheels and tires. Right now, the wheels are lug centric. Would like to go with hub...

Hello. I bought a ´63 Chevy C50 truck and the question is, what do I need to get my trailer electric brakes working with this truck ? ´63 chevy C50 hook up with 40´gooseneck trailer | I am happy to help you set your 1963 Chevy C50 truck up to...

Hi, I am looking for the product dimensions of the DU20025 storage, I didnt see it listed under the item description. Thanks! | According to the vendor, Du-Ha Truck Storage Box and Gun Case - Behind Seat - Black # DU20025 measures approximately...

Will this hitch fit a 1960 Ford F100? | We don't have any custom fit hitches confirmed to fit your 1960 Ford F-100, but a multi-fit hitch like the # 41990-07 could possibly work. I'd recommend using a hitch like this or having one professionally...

Hi, I have a 1960 GMC fleet side with an 8 ft. Bed. The frame rails are 41.5 inside to inside with the standard c channel frame. Im looking to tow a 1960-1965 era 13-15 ft. Canned ham camper. Do you have anything that will mount up? I want...

Hello, is this a pair of Grease Seal? I Need them for one Axle. Do i need 1 or 2 of RG06-050 ? Grease Seal - Double Lip - ID 1.719inch / OD 2.565inch - for 3,500-lb Axles TruRyde Seals for Trailer Bearings Code: RG06-050 | Part # RG06-050...

I have a reese 5th wheel hitch that I need to put on a 63 flat bed truck question is can I permanently install this on my truck?also do I need to have trailer brakes for this? | Yes, you can permanently install a 5th wheel hitch to your 1963...

I have a 1963 Ford flatbed truck that Im needing to install a 16k slider Reece fifth wheel hitch on to haul a 33 ft trailer. Is this possible? If so what do I need to get. | We have some universal base rail options out there but nothing that's...

Do the door wi down unzip | Yes, the windows of the Bestop Supertop Soft Top for Jeep # B5159504 do zip out. The side and rear windows are what zip out. |

I was told I should use the 1200 psi Hydrastar electric over hydraulic actuator on my trailer even though it says its for drum brakes and I have disc., I have a 1400# empty weight travel trailer with tandem axle. has 2000# flexride torsion...

Will your Titan Steel brake line tubing 10 feet work in a car application? I am building a 63 Chevy Nova and I need a long length to go from the driver side to the passenger side along the front of the engine compartment while turning and bending...

I have a snow trailer that. has 1/2x13 Threadsx1 Do you have any wheel bolts that will fit? | The closest stud we have is the Replacement Wheel Stud, Screw-In # 25-53. This bolt measures 2" in length and has the 1/2"-13 thread pitch you're looking...

I am looking for a Class III receiver to fit the subject vehicle I want to keep the bumper. Will the 41001 hitch clear the barden bumper? What measurements would I need to ensure that there is no interferance. | When mounted, the top of the...

Im calling about a rim for my truck | We don't carry vehicle rims, but we are aware that many people use trailer wheels like our Dexstar Conventional Steel Wheel with Offset - 15" x 6" Rim - 5 on 4-1/2 - Black, # AM20504 along with the Americana...