How to Measure for Trailer Hitch Clearance on a 1963 Ford F-100 With a Rear Barden Bumper

Updated 08/07/2012 | Published 08/04/2012

Products Featured in This Question

Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class IV - 2"

(39)

$246.57

Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class III - 2"

(8)

$275.05

Question:

I am looking for a Class III receiver to fit the subject vehicle I want to keep the bumper. Will the 41001 hitch clear the barden bumper? What measurements would I need to ensure that there is no interferance.

asked by: Dean G

Expert Reply:

When mounted, the top of the receiver of the Draw-Tite Max-E-Loader Trailer Hitch, # 41001, will sit 5-1/2 inches below the frame rail. So you can simply measure 5-1/2 inches from the bottom of your frame rail to see if the receiver will clear your Barden Bumper.

If you do not have enough clearance for the # 41001 hitch, then you may want to take a look at the Draw-Tite Trailer Hitch, # 41504. The receiver of this hitch will sit 7-7/16 inches below the bottom of your frame rail and is designed to work with trucks that have a deep drop bumper.

expert reply by: John H