!Designer Camper  x   >   !2002  x   >   Pollak  x   >  

6 pin round into 7blade round. Trailer Blows fuse on truck instantly when plugged in. 2015 Ford F-250 has 30A fuse for trailer running lights. Brake and turn lights work. Trailer has wire Junction block Cleaned the 6 pin round with contact...

I need an adapter to plug in a semi electric plug into a gooseneck electric plug with electric brakes. Is there an adapter for this conversion? | You'll need to make an adapter as there isn't one available. You'll need a 7-way round part # PK11720,...

i have a 2023 Hyundai Palisade SEL Premium with tow package and hitch What do I need for a hitch and wiring | Sorry, I am a little confused by your question as you mentioned needing a hitch and wiring but also said your 2023 Hyundai Palisade...

I want to use this Battery Isolation Solenoid # PK5231201 but I would like to see a wiring diagram to hook it up to my 7 pin junction box. I have the battery on my trailer to power my winch but once I connect if to the auxiliar power my breakaway...

I recently purchased Part Number TWSP12BP with intentions of installing a Group 24, 12v battery on the tongue of my enclosed trailer. Currently, the trailer has interior lights that only work when the 7-way plug is connected to my truck. The...

Prodigy p2 controller on a 2014 Chevy Silverado. With trailer connected I still get an n.c. Signal. Unit clicks when manual switch applied . I cut the blue wire 6 inches from unit. Unit still clicks hut does have power on blue wire reconnected...

Hi on the original plug in location there is a metal cover with 4 screws securing it. When I removed it there was what looked like factory 7 pin wiring socket which plugged into the plate. How do I remove the plate from socket? Will the plug...

Where to I put the wire to charge a battery on the travel trailer Do I put it on the auxiliary plug | To provide a maintenance charge to the battery on your trailer while you travel you will want to run the hot lead from the battery to the...

I need to make it so my tow car the Subaru Crosstrek can charge my tear trailer battery while driving. I have installed a 4 pin connector I did so before realizing that wouldnt charge the trailer battery, and now have part # 30717 to adapt my...

I have a 2012 Ford Escape v6 with factory installed tow package. It currently has a 4-pole electrical connector on one side of the junction box and 10 wires going toward the front of the vehicle. I am planning to purchase a pop-up camper trailer...

I am looking for an adapter for the following application. Trailer is 4 pin flat - vehicle is 7 way. Not sure if this exists since it eliminates the brakes. I occasionally need someone to transport my empty trailer back to me that will only...

I have a 2014 Nissan Titan with the 5.6foot short bed. I am wondering if this is the correct hitch and rails for me? | You are absolutely correct. The Demco Hijacker Autoslide 5th Wheel Trailer Hitch, part # DM8550040 and the installation...

I have no electric trailer brakes when stepping on pedal, I do have juice and brakes when sliding the manual knob. Everything was fine until a few days ago. it was wired by selling dealer when new, I did try to swap out controllers but still...

Looking for a 4 flat to 6 round tow wire approx 5 feet long anything like the Blue Ox coil would be great | I would be happy to help you make a 5' long 6-way round to 4-way flat adapter, but the longest premade adapter offered in this combination...

On my horse trailer I am trying to connect it to my 2009 GMC sierra 2500. The running lights work and the left turn and right turn signals work. The problem I have is that the trailer brakes do not show any output until I flip the internal light...

The motorhome has a 7-pin connector with separate brake and turn signal wires the car dolly has combined brake/turn signal the Prius has separate. What do I need to make this all work? Not sure if, legally, I need the lights on the tow dolly...

I need a new electrical connector for 2005 GMC 2500 HD. The Pollak PK11893 looks like what is needed but is there a new wiring harness that can be purchased from your company? Thnaks | The 7-way socket you referenced, Pollak # PK11893, connects...

Im looking at your Pollak and Hopkins vehicle plug connectors 7 way flat/4 way. Is one a stronger better made connector than the other? Which company would you rate better? | Personally, I'm a much bigger fan of Pollak than I am of Hopkins....

Will this adapter work on a 2014 Honda Pilot Touring SUV. I have attached pictures of the connector on the truck. | Your 2014 Honda Pilot is equipped with a standard 7-Blade connector with which the Pollak Adapter # PK12716 you referenced will...

Will this part have a solid fit for a Ford 150 Sport? | If your 2017 Ford 150 Sport has a 7-Way connector at the rear of the truck, the Pollak Adapter # PK12716 referenced in your question will work perfectly to convert it to a 4-way flat connector...

I have a 2017 Ram 3500 Dually Mega Cab with puck towing package. What would be a good sliding hitch to purchase... I dont know where to start between brands or set ups for this truck. Ive seen the Pullrite 24K and the Demco 21K but dont know...

I am looking for a fifth wheel hitch or goose neck for a Quad cab 2013 RAM 1500 Outdoorsman with 4 corner air suspension and RAM Box Storage. It has the 6 foot bed | Short-bed Ram trucks with the Rambox feature are not ideal for 5th wheel towing...

Just installed a Reese pilot brake controller on my 2010 silverado. Was working fine showing red light when I engaged the brake. Hooked to a camper and now all the controller does is flash the little red dot between the numbers.. It has never...

There is power to the fuse for stud 1 and 2 but no power to them with the fuses in place. There is no continuity from the fuse to the studs also. Do I have to do some wiring under the fuse box to connect the fuse to the stud. I am trying...