Determining Which Trailer Hitch Receiver Fits A 1995 Ford F-450 Cab and Chassis
I am looking for a hitch to install on my 95 F450. I am trying to weigh the benefits of maximum weight capacity vs. having a 2-1/2 inch receiver. Do you have any suggestions or am I missing a product. If this is a good choice hitch, can you...
Recommended Class IV Trailer Hitch Receiver For 1992 Ford F-250 Extended Cab 4WD
I need a class 4 hitch if available for 1992 F250 Extended cab 4WD. I previously had a 1992 F350 4 WD 4 door pickup truck and saved the hitch. It is not the same bolt pattern as the same year F250 Extended cab | We have just what you...
Recommended Windshield Cover for a 1995 Chinook Motorhome on a Ford E-350 Chassis
I need a windshield cover for my rv. Will this fit and does it have cutouts for the side mirrors? Do you have a cover that will fit if this is not the correct one. thanks | The correct Adco RV Windshield Cover for your 1995 Chinook Motorhome...
What is a Cab and Chassis Truck for When Picking Out Gooseneck Hitch
What does cab and chassis mean when the description says the kit does not fit this style? Vehicle is 1994 F350 XLT VIN K dually with 4 door cab and 8 ft bed. Thanks | Can and chassis trucks are trucks that were sold without a truck bed installed....
How to Install a 12v Wire on a Horse Trailer to Charge a Trailer Battery
I have a horse trailer with a home made living quarter that I would like to keep the battery charged while driving. Can I connect the 12v hot wire from the truck plug straight to the battery on the trailer? I drive a 2006 Ford F-350 | Why type...
Why Does a Activator III Brake Controller 5520 Read Erratically on a 2003 Ford F-350 Super Duty
this truck has a drawtite activator 3. when you press the brake in the truck the display starts reading erratically, strobing rapidly. if you dial to 0 it subsides. this happens with or without the trailer connected. this controller plugs right...
What Converter Do I Need for a Magnatek Model 940-2?
Magnetek series 900 model#940-2 40amp what can I replace it with | The part that you need for a replacement converter for your Magnatek series 900 model 940-2 is the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger #...
Trailer Brakes Arent Working After Replacing a Corroded 7 Way Plug
I have a professionally installed Curt Spectrum. It worked fine for awhile. The 7 pin plug corrosion caused lights and trailer brake to not work. I rewired the lights and brake away switch and they work fine but the the brake has power but shows...
Correct Replacement Elixir Roof Vent On a 1995 Northern Light Cab over Camper
i have a 1995 northern lite cab over camper and need to replace 2 elixir roof vent lids but want to go with polycarbonate. i want the camco brand but i’m unsure of the model. my old lids are 14.5x14.5 inches and is a heng’s brand that i put...
How to Determine Correct Replacement Double-Eye Leaf Springs for EZ-Loader Boat Trailer
Looking for a spring for my EZ LOADER Boat trailer. Measured from eye to eye center with boat on trailer. Is 25.75inch 3 leaf Thanks Much | It is tough to determine the actual length of a double-eye leaf spring when it is still installed...
1995 Ford F-250 Curt Double Lock, Flip and Store Underbed Gooseneck Hitch
I own a 1995 f250 XLT long bed. I am unsure if the Curt gooseball hitch will work in my vehicle *does not fit 34 inch frame? Where would i measure to determine this? | That's a great question, your measurement will come from behind the cab....
How Wide is the Hitch Tube on the Buyers Class 5 Service Body Hitch Receiver
What is the width of thus hutch tube. I assume 44 Thanks | The Buyers Products Class 5 Service Body Hitch Receiver - 2-1/2" part # 3373018538 Does in fact measure 44" from end to end. The video below can show more detail. |
Do Mounting Bolts in a Channel Coupler Need to be Tight
When mounting a cast coupler to a adjustable trailer tongue channel do the 2 bolts need to be tightened enough to pinch the channel bracket tight to the coupler or is it ok for the coupler to wiggle a little on the bolts in-between the channel...
Which Brake Controller Install Harness Fits 1994 Ford F-350 for Tekonsha Prodigy P2
I purchased the 90885 controller and 3036 harness for my 94 f350 with trailer package and 7 way plug. the harness is not correct and the controller appears to be wrong also as I have a green brake light wire at the harness that is grounded when...
Recommended Air Bag System for a 1996 Ford F-250 w/ a B&W Hitch
Can I use Firestone kit # W217602071 with my BandW Gooseneck on my 1996 Ford F250 short bed 4x4 | No you can't, but I have an air bag system that will. For your 1996 Ford F-250 with an in bed hitch, I recommend the Air Lift LoadLifter 5000 Air...
Recommended Weight Distribution System for 23' Trailer Weighing 6,400LBS Full & 540LBS Tongue Weight
I have a 23 trailer that is 6400 pounds full. has a Tongue weight of 540 pounds. I have a lot of trouble with sway. I tow it with 1996 FORD F250 Which anti sway hitch should I use. | I recommend using the Fastway e2 Weight Distribution # FA92-00-0800...
Does Curt Gooseneck Hitch # C60723 Fit 1996/1997 Ford F-250 Short Bed
Does this fit the 96 and 97 F-250 crew cab short bed models? Going by the pictures I dont think it will bolt to my frame in the correct spot | I double-checked with Curt and the gooseneck hitch part # C60723 is listed as a fit for the long...
Which Westin Fey Surestep Rear Bumper Fits Old Body Style 1997 Ford F-250 HD
In 1997 Ford built 2 different f-250 trucks. The early model is now called the OBS old body style. If you enter 1997 Ford F-250 it shows the newer model of the two. Which chrome rear bumper with the black step pad will fit my 1997 Ford F-250...
Fifth Wheel Rail Kit Recommendation for a 1996 Ford F-250
Will bed rails #C16448-204 for fit my 1996 F250 pick up with out drilling in the frame. I recently ordered a demco goose neck plate but it was on back order and come to find out my demco system was an original and it would not fir so i canceled...
Brake Controller Installation 1993 Ford F350
I have a Tenkosha P2 brake controller that I need to book to my 1993 F250 7.5L. Im guessing that 3035-P is the correct harness? It says Ford, but doesnt list what years. Where does this plug into the truck? Under the steering wheel somewhere,...
Does Buyers Products Hitch Plate Fit 1996 Ford F-350 Cab and Chassis
WILL THIS HITCH PLATE FIT 1996 FORD F-350 ?? WHERE CAN I MOUNT EXISTING TAIL LIGHTS ? ALSO LOOKING FOR A SIMPLE WIRE KIT FOR SAME TRUCK | The Buyers Products Hitch Plate with Receiver Tube - Ford # 3371809060A will indeed fit a 1996 Ford F-350...
How Does Curt Hitch C15511 Fit Both 34 & 37-1/2 Inch Frames on 1993 Ford Super Duty
This item says it was designed to fit both the 34 inch and the 37-1/2 inch frame widths. your diagram shows the holes center up at over 34 inch wide. How does this fit on a 34 inch wide frame? | That's a really good question, and the reason...
Weatherstripping Replacement for Motorhome Window that is 1/2 inch Wide
I am looking to replace the molding/weatherstripping around the cab over solid window of my 1995 class c Coachman motorhome. The window is about 14 inches x 5 feet. I don’t see a product in your website but may be searching incorrectly. It...
Does Width of Curt Trailer Hitch C15300 Fit 1993 Ford Super Duty Pickup
Is this the Cab and Chassis width or Pickup Width? | The Curt Trailer Hitch Receiver # C15300 is designed to fit the 37-1/4 inch frame width of a 1993 Ford F-250 or F-350 pickup with a standard bumper. I have added a link below to a video install...
Filter Your Search
Contact and Help