RV Exterior Lights Specs:
Features:
...polycarbonate lens and housing White LEDs with clear lens Mounts on surface of trailer - hardware not included 2-Wire pigtail - includes power lead and ground wire CSA certified for use in sleeping quarters Specs...
More Information >RV Exterior Lights Specs:
Features:
...Low-profile, rectangular dome light provides bright white light for your trailer's interior Built-in toggle switch controls on/off function Durable surface-mount technology ...
More Information >LED Strip Lights Specs:
Features:
...polycarbonate housing and lens Clear lens with white LEDs Compatible with 12V DC systems Surfacce mount - hardware not included 2-Wire design - includes ground wire and lead wire for power Specs: Overall...
More Information >RV Exterior Lights Specs:
Features:
...systems Surface mount - hardware not included 2-Wire pigtail includes power lead and ground wire Assembled in the USA Specs: Dimensions: 2" long x 1-5/8" wide x 1/2" deep Mounti...
More Information >LED Strip Lights Specs:
Features:
...systems Surface mount - hardware not included 2-Wire design includes ground wire and lead wire for power Specs: Dimensions: 9-5/8" long x 1" wide x 5/8" thick Interior stri...
More Information >RV Exterior Lights Specs:
Features:
...that have brittle filaments. And because LEDs draw minimal power, the light won't drain your battery, overload your circuits, or produce too much heat. Surface-Mount, Bolt-On Installation is E...
More Information >LED Strip Lights Specs:
Features:
...systems Surface mount - hardware not included 2-Wire design includes ground wire and lead wire for power Specs: Overall dimensions: 15-3/4" long x 1" wide x 5/8" thick Interi...
More Information >RV Exterior Lights Specs:
Features:
...polycarbonate housing and clear lens with polished chrome finish Surface mount to trailer - hardware not included Included gasket creates a weathertight seal 2-Wire pigtail - includes power lead and ground wire...
More Information >LED Strip Lights Specs:
Features:
...times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear polycarbonate lens Durable white polycarbonate housing Surface mount - hardware...
More Information >RV Exterior Lights Specs:
Features:
...sealed, waterproof housing and lens unit is submersible Durable polycarbonate lens and housing White LEDs with clear lens Mounts on surface of trailer - hardware not included 2-Wire pigtail - includes...
More Information >RV Exterior Lights Specs:
Features:
...white LEDs last longer and burn brighter than incandescent bulbs Durable ABS lens and housing Snap-in, clear lens allows for easy replacement Surface mount - hardware included 2-wire pigtail includes...
More Information >Work Lights Specs:
Features:
...Clear lens over white LEDs Compatible with 12V and 24V DC systems Mounts to trailer surface - hardware not included Can also be recessed mounted 2-Wire pigtail includes power lead and ground wire Specs...
More Information >RV Exterior Lights Specs:
Features:
...with white LEDs Die-cast aluminum housing is rustproof White coating protects against corrosion and damage caused by UV rays Surface mount to trailer - hardware not included 2-Wire pigtail - includes power...
More Information >RV Exterior Lights Specs:
Features:
...housing and lens unit Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements...
More Information >Work Lights Specs:
Features:
...to trailer surface - hardware not included Can also be recessed mounted 2-Wire pigtail includes power lead and ground wire Specs: Dimensions: 6-3/8" long x 1-1/16" wide x 5/8" ...
More Information >Work Lights Specs:
Features:
...a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole...
More Information >RV Exterior Lights Specs:
Features:
...incandescent bulbs Chrome bezel provides a polished look Clear lens over white LEDs Surface mount - hardware not included 2-wire pigtail includes ground and lead wires Specs: Dimensions: 5-5/8" diamet...
More Information >RV Exterior Lights Specs:
Features:
...sealed, waterproof housing and lens unit is submersible Durable polycarbonate lens and housing White LEDs with clear lens Mounts on surface of trailer - hardware not included 2-Wire pigtail - includes...
More Information >Videos
for RV Interior Lights
Help Articles
for RV Interior Lights
Expert Answers
for RV Interior Lights
I have a solution for you, but the main issue with puck style lights that mount to the surface of your RV ceiling or under cabinets, is that there…
view full answer...As you have a Coleman Mach system currently you can use the Furrion Chill AC units from the list below. These will simply replace only the rooftop units and the controls and thermostats you currently have in place with control the new…
view full answer...Yes, you will be able to use the Furrion Chill HE RV Air Conditioner System #FR87FJ to replace all your Coleman MACH components. The thermostat will be able to control your furnace and run off the thermostat wiring your Coleman AC uses.
view full answer...The 12v accessory pin from the 7-way would need to be connected to the battery in order to charge it so…
view full answer...The High Pointe microwave part #HP49ZR would work great as a replacement for what you have now as…
view full answer...I recommend replacing your lights with the LED RV Dome Light w/ Switch #RVILL50. These LED lights will outlast and use less power than the florescent tube lights in the Liteco 179 that you currently have. These lights are…
view full answer...For 12v Vanity lighting we only offer the following products which are all satin nickel: Item #277-000324, Item #277-000446, Item #277-000322, and Item #277-000429.…
view full answer...You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.
view full answer...Hey Kass, so the part #372541-3-A is designed to fit in place of standard cable hatch in this size so if you have something similar this would work as a replacement but the distance between the mounting holes is 3-7/8 inches center to center.
view full answer...For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…
view full answer...The closest option we have to replace the problematic SL206M2 lights in your 2014 Forest River Cedar Creek Silverback 5th Wheel Trailer is the LED RV Interior Light - 9 Diodes - Surface Mount - White Housing - White #328-K-1050Q9 which are a little…
view full answer...