2022 Jeep Grand Cherokee WK - old body Roof Rack

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

The sunroof should not be opened while the rack is installed. Remove rack when not in use.

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

The sunroof should not be opened while the rack is installed. Remove rack when not in use.

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

This quiet, aerodynamic roof rack lets you carry gear on your vehicle with fixed mounting points. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

This quiet, aerodynamic roof rack lets you carry gear on your vehicle with fixed mounting points. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

Tech Tip:

There should be no metal strip on top of the flush mount side rails, only black plastic

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Features:

Lightweight aluminum crossbars and vacuum cups create a roof rack for your vehicle with a naked roof. Durable, round bars install in seconds and work with most clamp-on accessories. Removes quickly for storage in your trunk when not in use.

Features:

Lightweight aluminum crossbars and vacuum cups create a roof rack for your vehicle with a naked roof. Durable, round bars install in seconds and work with most clamp-on accessories. Removes quickly for storage in your trunk when not in use.

Features:

Lightweight aluminum crossbars and vacuum cups create a roof rack for your vehicle with a naked roof. Durable, round bars install in seconds and work with most clamp-on accessories. Removes quickly for storage in your trunk when not in use.

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

The sunroof should not be opened while the rack is installed. Remove rack when not in use.

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

The sunroof should not be opened while the rack is installed. Remove rack when not in use.

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

Towers attach to the vehicle's gutters or side rails and are fitted over the existing roof rails.

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

Tech Tip:

There should be no metal strip on top of the flush mount side rails, only black plastic

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

Towers attach to the vehicle's gutters or side rails and are fitted over the existing roof rails.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

Towers attach to the vehicle's gutters or side rails and are fitted over the existing roof rails.

Features:

This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

Towers attach to the vehicle's gutters or side rails and are fitted over the existing roof rails.

Features:

Heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

Towers attach to the vehicle's gutters or side rails and are fitted over the existing roof rails.

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's fixed mounting points or tracks.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's fixed mounting points or tracks.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

Tech Tip:

Towers attach to the vehicle's gutters or side rails and are fitted over the existing roof rails.

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Features:

Built for off-road use, this platform rack's large surface accommodates all types of gear and cargo. RuggedLine HD system provides a strong mounting surface for the platform. Compatible with many Yakima accessories.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails. Removal of the Jeep factory rails is required.

Features:

Built for off-road use, this platform rack's large surface accommodates all types of gear and cargo. RuggedLine HD system provides a strong mounting surface for the platform. Compatible with many Yakima accessories.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails. Removal of the Jeep factory rails is required.

Features:

SquareBar Evo crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.

Installation Notes:

The sunroof should not be opened while the rack is installed. Remove rack when not in use.

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

SquareBar Evo crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.

Installation Notes:

The sunroof should not be opened while the rack is installed. Remove rack when not in use.

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Designed for use in the Australian Outback, this rugged platform lets you bring whatever gear you might need for your next adventure. Compatible with many Yakima off-road and traditional roof rack accessories.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

SquareBar Evo crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.

Installation Notes:

Tech Tip:

Towers attach to the vehicle's gutters or side rails and are fitted over the existing roof rails.

Features:

SquareBar Evo crossbars attach to Thule feet to create a durable, reliable roof rack for your vehicle. Bars are constructed of galvanized steel with a polymer coating that provides grip for your cargo. Accommodate accessories that clamp around bars.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

Tech Tip:

Towers attach to the vehicle's gutters or side rails and are fitted over the existing roof rails.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

Tech Tip:

Towers attach to the vehicle's gutters or side rails and are fitted over the existing roof rails.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Installation Notes:

Tech Tip:

Towers attach to the vehicle's gutters or side rails and are fitted over the existing roof rails.

Features:

Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.

Features:

Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. Roof rack legs install to the fixed mounting points on your vehicle's roof. Compatible with many Rhino-Rack accessories.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Tech Tip:

Towers attach to the vehicle's gutters or side rails and are fitted over the existing roof rails.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Built for off-road use, this aerodynamic platform rack's large, flat surface accommodates loads of all shapes and sizes. Backbone mounting system provides a stable mounting surface for the platform. Compatible with many Rhino-Rack accessories.

Installation Notes:

Tech Tip:

There should be no metal strip on top of the flush mount side rails, only black plastic

Features:

Built for off-road use, this aerodynamic platform rack's large, flat surface accommodates loads of all shapes and sizes. Backbone mounting system provides a stable mounting surface for the platform. Compatible with many Rhino-Rack accessories.

Installation Notes:

Tech Tip:

A metal strip should exist on top of the flush side rails.