Flat Tow 2020 Jeep Cherokee Using D-Ring Bumper or Factory Tow Hooks

Question:

Is there a Falcon tow bar that will attach to the front red pull hooks on a 2020 Jeep Trailhawk?

asked by: Morrison H

Expert Reply:

That'll depend on what you mean by pull hooks. If you're referring to a D-ring bumper, and if the bumper is rated for towing we might have an adapter that will work for you, depending on the width of the tabs that the D-ring mounts to. In order to attach the tow bar to the D-ring mount, the D-ring will first need to be removed a shown in the provide photo.

If the tab that the D-ring mounts to is 3/4 of an inch wide, use # RM-035 or # RM-035-1 if the tab is 7/8 or 1 inch. Either of the two would attach easily to a Roadmaster Falcon All-Terrain tow bar like # RM-522.

If you're speaking of the factory tow hooks that attach to the frame (not a bumper) then no, there isn't a way to attach a tow bar to those tow hooks. You'd need to use a base plate like part # RM-521451-5 from Roadmaster.

expert reply by: Mike L