Trailer Hitch with 2 Inch Receiver for 2019 Acura RDX

Question:

I’m looking for a tow hitch with 2-inch receiver for my 2019 Acura RDX A-Spec. I already have the bumper fascia replacement to accommodate a hidden hitch for a clean installation. Do you have any available? If not, can I custom order one? Thank you.

asked by: Jowelee

Expert Reply:

I checked with our hitch manufacturers and there is one with a 2 inch receiver that fits all models of the 2019 Acura RDX, the Draw-Tite Trailer Hitch # 76268.

While the hitch does have the receiver size you are looking for it does not have a concealed crosstube, it is visible, as you can see by the accompanying photo of the hitch installed, which was taken from the linked installation instructions. This is a Class III hitch with a 3,500 lb towing capacity and 350 lb tongue weight capacity that does not require any drilling to install and comes with a lifetime warranty.

In regards to custom-made trailer hitches, that is not something available from the hitch manufacturers.

If you are going to be using this vehicle for towing you will need a wiring harness and for one that will give you a 4-way connector and allow you to power your trailer's lights you need Wiring Harness # 119250KIT. I also recommend checking out Ball Mount Kit # 989900, which is for 2” hitches and may fulfill your towing needs in one tidy package; two ball mounts - one with a 3/4” rise or 2” drop and the other with a 2-3/4” rise or 4” drop - a 1-7/8” hitch ball, a 2” hitch ball, and a pin and clip.

You can use the link to the help article on ball mounts I've added to determine if this kit will give you the correct amount of drop or rise.