Electric Trailer Brakes and Hub/Drum Assemblies for Timbren Axle-Less Suspension Kit
Question:
I am trying to add brakes to my trailer with the 2000# timbrens. I had ordered Item # AKHD-545-2-EZ-2K, from trailer, but its not correct. I need an assembly that uses bearing #L68149 as an inner and #L44649 as the outer. What part do I need? Can I use the brakes, Item # AKEBRK-2L and 2R? Bolt pattern is 5x4.5. Thanks.
asked by: C
Helpful Expert Reply:
If you have a 2K-rated Timbren axle-less suspension kit # ASR2KHDS03, which includes brake flanges but not hub/drums, you can add brakes and hub/drum assemblies. For the hub use part # AKHD-545-35-EZ-K. This has the matching bearings and 5-on-4-1/2 wheel bolt pattern.
For compatible self-adjusting 10-inch electric drum brakes use kit # AKEBRK-35-SA, which is a pair of left- and right-hand brakes rated for 3500-lbs.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Timbren Axle-Less System for a Livin' Light QuickSilver 10.0 Pop-Up Camper
- Q&A: Is There a 5 on 4-1/2 inch Bolt Pattern Hub Available for Timbren Axle-Less ASR2KHDS03
- Q&A: Recommendation for Converting Fleetwood Neon Pop-Up to Axle-Less Suspension System with Jeep Tires
- Q&A: Timbren 2,000LB & 3,500LB Axle-Less Suspension Systems With #84 Spindle and 4 Bolt Brake Flanges
- Q&A: Availability of 3,500 lb Axle Hub with 6 Lug Bolt Pattern that Fits Timbren Axle Less Kit
- Q&A: How to Pick Out Replacement Hubs for a Boat Trailer
- Q&A: What Happens if You Install Trailer Brake Assembly Upside Down
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: What Exactly is Tongue Weight?
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Install E-Track in 3 Easy Steps
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Raise Your Travel Trailer Height