Can You Re-key BOLT Trailer Hitch Receiver Lock

Question

Question:

Can you rekey this after you have traded in vehicles?

asked by: John

0

Expert Reply:

I spoke with my contact at BOLT and he said for security reasons all BOLT Locks permanently learn the first key used in them and cannot be reset. BOLT recommends users sell the locks with their vehicle and purchase a new set of locks with their new vehicle.

expert reply by: Chris O

0

Brett M.

7/28/2020

I need 10 hitch pin locks and would like them to all be key alike. How can I do that?

Jon G.

8/4/2020

We got you covered with the etrailer locking hitch pins. Use part # e98882 for a 2" hitch or part # e98881 for a 2-1/2" hitch and then select the "keyed alike" option and change the quantity to 10.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hey Jason! I'm guessing you have the 12" long shank right now which is the standard. For a longer shank that fits a 2-1/2" receiver you can use the Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 16" Long - 7" Rise,…

view full answer...

Answer 9

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Answer 10

Hey Terry! In order to mount the CE Smith Fenders #CE19504-2, normally I recommend #CE26098G-2 or #CES54XR (x 2) depending on your application. Do you know if you need the 90 degree bend to attach to the frame of the trailer, or the straight bracket?…

view full answer...

Answer 11

Hello Brian, Thanks for finally finding an opportunity to write in. Yes, the B&W Continuum Weight Distribution System #BW78FR would be a great choice for your 2025 Ford Expedition Tremor with the HD towing package and your Rockwood Mini Lite…

view full answer...

Answer 12

Hello Tom, Welcome to etrailer, I'm glad you found us! I see you were looking at the ICON locks, EXCELLENT choice! I was pretty impressed when they came here to etrailer with power tools and other locks just to show us how well their locks are…

view full answer...

Can You Re-key BOLT Trailer Hitch Receiver Lock

Product Page this Question was Asked From

Continue Researching