What are the Measurements of the Demco # DM8759131 Brake Actuator

Updated 12/04/2014 | Published 12/03/2014

Question:

I MAY HAVE A MOUNTING PROBLEM DUE TO TOUNGE LENGTH AND THE LOCATION OF MY JACK WHICH IS WELDED ON... CAN YOU SUPPLY ME WITH OVERALL UNIT DIMENSIONS AND HOLE SPACINGS SO THAT I CAN DETERMINE WHETHER MOUNTING CAN BE DONE WITHOUT MOVING THE JACK OR MODIFYING THE TOUNGE?

asked by: MILES

Expert Reply:

I went to our warehouse to get the Demco brake actuator and provide you several measurements.
The overall length is 23-3/4 inches and 5-3/4 inches from the channel to outer housing. The 3 center eye to eye measurements are 1.34 and 2-inches on the channel and each pin hole is .65 inches in diameter. The mounting flanges below the outer housing measurements are 3-inches from eye to eye on the mounting flange with 2 pin holes. Each of these mounting holes are .52 inches.

I included a diagram to the right and a video for you to look at.

expert reply by: Chris B