Roof Vent Replacement Recommendation for a Cargo Trailer

Updated 12/02/2014 | Published 12/01/2014

Question:

Hello etrailer. I have a cargo trailer roof vent I need to replace. I guess it is a simple standardinch vent but I am limited to my knowledge on these. This vent that you offer, V2092SP-29, looks to be the proper replacement. Under information, it reads that the metal lip is 16 1/2inch by 16 1/2. Does this refer to the overall outside diameter of the metal flashing with holes? Edge to edge on each side? I am asking because this is the size of my vent. Thanks for the time and patience.

asked by: Joey O

Helpful Expert Reply:

The # V2092SP-29 that you referenced has overall dimensions of 16-1/2 inches by 16-1/2 inches. This includes the metal lip around the outside of the vent. This vent is designed to fit a rough cut hole of 14-1/4 inches by 14-1/4 inches. This is a pretty standard size for a roof vent and is most likely what you have so it should work. But you will want to confirm by checking the dimensions of the roof of your cargo trailer.

I attached a review video for this product for you to check out as well.

expert reply by: Jameson C