What Diameter Studs are Used in the Trailer Hub Assembly # 845475UC1
Updated 11/18/2014 | Published 11/17/2014
Question:
What size studs are used on these hubs?
asked by: Chris T
0
Expert Reply:
The studs that are used in the Hub part # 845475UC1 are 1/2 inch in diameter. I attached a review video for you to check out as well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Q&A: Replacement Hub for Utility Trailer with Dexter 8-256 Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Recommended Replacement for a Dexter Hub with a 5 Bolt Pattern and A 2-3/4 Inch Bolt Distance
- Q&A: Replacement Hub Needed for Dexter Axle 8-256
- Q&A: Right Hand Side Equalizer to Match Left Hand Side # 13-82-1
- Q&A: Determining Correct Replacement Hubs for Dexter 8-286 Hubs on 2,500 Pound Axle
- Q&A: Replacement for UFP HD1377 Trailer Hub/Drum
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub