Can I use a Rectangular Axle with Round Axle on Tandem Boat Trailer
Published 10/24/2014
Question:
I have a bent axle on my boat trailer. It is 2 inch diameter rectangular steel. I need to replace it. My trailer is a tandem. Is it ok to use a round axle with a rectangular axle? The other axle is good so I dont want to replace it. Thank you.
asked by: Joe H
Helpful Expert Reply:
I spoke with my contact at Redneck Trailer Parts and he said that yes you can use a rectangular tube axle with a round tube axle on your tandem boat trailer as long as the hub base diameter and spring center diameter are the same.
You will also need to add U-Bolts. I have included a link to all of our U-Bolt kits for your to check out.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Correct Round U-Bolts for 3,500 Lb Dexter Trailer Axle
- Q&A: Dimensions of Spindle on 3,500 Pound Dexter Trailer Axle
- Q&A: Recommended Hydraulic Jack Leg That Can Be Used w/a Hydraulic System on a Dump Trailer
- Q&A: Need Replacement Axle for LCI 4400 LB axle that says 95.5/75
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Replacement Brake Assemblies for Dexter 3,500 lb Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: How to Raise Your Travel Trailer Height
- Q&A: Can I Upgrade 3,500 lb Axles to 5,200 lb Axles on a Budget
- Q&A: How To Remove Spindles From Trailer Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Wiring Diagrams