Dimensions of the Kodiak Disc Brake Kit # K2R526D

Published 10/16/2014

Products Featured in This Question

Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs

(160)

$503.95

Demco Hydraulic Brake Line Kit for Tandem Torsion-Axle Trailers - Drum or Disc Brakes

(19)

$182.54

Question:

Can you provide a drawing or dimensions for the K2R526D? We are designing a heavy industrial cart with hard rubber fork liftinch tires and want to add brakes. We really rather not buy the parts until we have laid out how they will fit. The dimensions we need are: ID of center hole in rotor. Bolt hole size. Offset from mounting surface to rotor center. Hydraulic fitting spec. Offset in caliper mounting bracket relative to the rotor center. Width of the caliper on either side of the rotor. Also, is the DM5425 brake line kit appropriate for the K2R526D?

asked by: Karl G

Expert Reply:

I went out into our warehouse to get all of the dimensions you requested.

The inner diameter of the center hole for the rotor is 3.6 inches.
The diameter of the bolt holes in the rotor are .52 of an inch.
From the mounting surface of the rotor to the rotor center measures 2.25 inches.
From the mounting surface of the caliper to the rotor center measures 3.15 inches.
On the thicker side of the caliper the distance from the mounting flange to nearest portion of the rotor is 2.6 inches.
On the thinner side of the caliper the width from the outside of the caliper to the rotor is 1.2 inches.
The fitting size is 3/16".

I also attached a review video for you to check out.

The Demco Hydraulic Brake Line Kit # DM5425 that you referenced would be an appropriate brake line kit for this disc brake kit.