bing tracking image
Q & A Icon

Plug-And-Play 4 Pin Setup For 2014 Honda Accord EX With LED Tail Lights For Trailer Or Rack Lights  

Updated 11/21/2026 | Published 11/19/2026

Question:

Hello, I have a 2014 Honda Accord EX with LED taillights I believe, Im looking for the plug and play wiring harness for trailer lights i thinks its called the 4-pin setup. Do you have a part number? P.S. I used to have a 2013 Accord regular lights but that harness doesnt fit... Thank you.

0

Expert Reply:

Hello Michael!

Thanks for all the info. Not everyone provides all of that, so it's refreshing lol. If your 2014 Honda Accord does indeed have LED tail lights, you'll want the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56173. If it's actually got the incandescent non-LED tail lights then you'd instead want # C56011.

If you can't tell, just check for a bunch of diodes in the tail light which means it has LED. Or, open the trunk and pull the carpet back if needed to get to the tail light bulb. If it's a normal light bulb with a filament, then it's incandescent non-LED.

Both are plug-and-play and will provide your vehicle with the 4 way flat harness to power the lights on a trailer, bike rack, or cargo carrier etc. What are you planning to use it for?

expert reply by:
0
Andrew N
Michael P. profile picture

Michael P.

11/19/2026

I believe the c56173 will work for my trailer lights. I just ordered it.

Andrew N. profile picture
Etrailer Expert

Andrew N.

11/19/2026

@MichaelP Sure sounds like the right fit since the other one from the 2014 didn't work (likely due to the older one being non-LED). Let me know how it goes and if you need anything else, and thanks for the business of course.
Fred profile picture

Fred

11/21/2026

Connector worked great .. easy to install.. Only issue I had was the ground.. drilled small hole in inside panel...wire brush paint off. then it worked great.. still using it.

Andrew N. profile picture
Etrailer Expert

Andrew N.

11/21/2026

@Fred Thanks for the feedback! Yes sometimes sanding to bare metal on the vehicle is necessary to get a proper ground connection there. Glad you got it figured out Fred!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>