Options to Level a Fifth Wheel Trailer that is Being Towed by a Taller Truck

Updated 08/05/2014 | Published 08/03/2014

Products Featured in This Question

Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 5-7/16" Center

(119)

$159.91

Dexter Trailer Springs Over-Under Conversion Kit

(779)

$72.79

Dexter Trailer Springs Over-Under Conversion Kit

(779)

$88.81

Question:

I just bought a new 2014 F250, when I hooked it up to the fifth wheel camper, the back in of the trailer is real close to the ground and i am concerened about damaging my sewer tanks. Do I have any options in raising the back of the trailer?

asked by: Jerry R

Expert Reply:

The easiest solution would be if you could lower the head of your fifth wheel hitch, or raise the pin box of your trailer. Either of these options should allow your trailer to sit more level. You would want to make sure you have between 4-6 inches from the overhang of your trailer to the bedrails though.

Another option you have would be to move your axles to below the leaf springs. This is the most common way to lift a fifth wheel trailer to allow the trailer to be towed level if the hitch and pin box adjustments are maxed out.

The diameter of your trailer axle will determine the size of the parts that you will need to order. If your axle is 3 inches diameter, the Dexter Trailer Springs Over-Under Conversion Kit, # K71-385-00, would be a great choice and if your axle is 2-3/8 inch diameter you could use the Over-Under Kit, # K71-384-00. These kits can be installed without welding but the manufacturer strongly recommends having the new spring seat tacked in place on the other side of the trailer axle.

expert reply by: Jameson C