bing tracking image
Q & A Icon

Installing Demco Hijacker Mounting Bracket And Universal Fifth Wheel Rails In 2018 Ram 2500  

Updated 11/16/2026 | Published 11/15/2026

Question:

I have a 2018cRam 2500. Im trying to install demco hijacker mounting bracket kit to universal rails. These rails dont have the 4 holes on each side where your carriage bolts through bed. Im lookinhvfor dimension to those hole for proper location .

0

Expert Reply:

Hey Frank! The Demco # DM8552025-71 kit uses industry-standard fifth-wheel rails, but the mounting holes that secure the rails to the underbed brackets aren't necessarily the same between manufacturers.

I measured approximately 33" between the closest mounting holes and 35" between the second set, as shown in the attached diagram. However, these are precise holes and even with the measurements given, it will be difficult to get it exactly accurate like the Demco rails themselves.

Also, Demco's rails use square holes to secure the carriage bolts, so that's another thing that won't be the same as the Demco rails.

I wouldn't recommend drilling additional holes into your rails since this goes against Demco's installation instructions and our recommendations. Any modifications would be at your own risk, and we can't guarantee their safety or compatibility.

The safest option is to use the complete # DM8552025-71 kit with the correct rails, brackets, and hardware.

Out of curiosity, what brand universal rails do you have? We may have brackets that fit it.

expert reply by:
0
Andrew N
DM6071
DM6071
(click to enlarge)

Product Page this Question was Asked From