Optronics LED Tail Light Dimensions and 3 Prong Connection for a 2026 Haulmark Car Hauler
Updated 11/12/2026 | Published 11/07/2026 >
Question:
I need the exact dimensions of this light? I think this is what I need for my 2026 haulmark car hauler. The current light cracked and it has that plug on the back with 3 prongs.
asked by: Chris
Expert Reply:
Hi Chris! There's a good chance the Optronics LED Trailer Tail Light # STL12RB is what you need for your 2026 Haulmark car hauler, especially since you mentioned your original light has a 3 prong connection on the back. This Optronics light accepts a standard 3 prong plug, so if your existing connector is the same style, you should be able to plug it right into the new light without having to mess with any wiring. The light measures exactly 6.46 inches long, 2.28 inches tall, and 1.75 inches deep, and it has 6 LEDs in an oval housing.
It's a recessed light that installs using a rubber grommet, so if your current grommet is still in good shape and fits the new light, you should be able to reuse it. Otherwise, you can replace that separately. I've attached a diagram below showing the exact measurements so you can compare them with your original light.
What are the dimensions of the current light?
Product Page this Question was Asked From
Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 6 Diodes - Oval - Red Lens
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- Oval
- Recessed Mount
- Submersible Lights
- LED Light
- 6-1/2L x 2-1/4W Inch
- Red
- Optronics
more information >
Continue Researching
- Q&A: Replacement Torsion Arm Kit w/a 5 on 4-1/2" Lug Nut Pattern for a 3,700 lbs Dexter Versa-Flex
- Q&A: Looking for Horse Trailer Door Latch Replacement
- Q&A: Replacement Trailer Hub for the TDE 46205 with Galvanized Finish
- Q&A: Direct Replacement Water Heater for Atwood Model GC10A-4E
- Q&A: Recommended Electric Winch for 7,000 Pound Boat Trailer
- Q&A: Will Adarac Pro Series Ladder Rack Work With TruXedo Hard Roll Up Tonneau Cover?
- Q&A: Replacement Shock for Dexter Axle 052-003-00
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: How to Install E-Track in 3 Easy Steps



Dave
11/8/2026
These are all made to a standard size I believe. The plug was the same as my old ones Wich is good because they don't come with a new pigtail. I would get new rubber grommets if yours are older as mine were difficult to remove the old and install the new one due to the old rubber being stiff.