Replacement LED Brake and Tail Light for a Lakota Horse Trailer
Updated 11/07/2026 | Published 11/06/2026 >
Question:
Looking for a replacement part for a rear brake light on a Lakota horse trailer. I can send you a picture. It has 6 LED lights in an oval shape housing and it’s approximately 6 inches long and 2 inches wide. Can you help me find the right part?
asked by: Donna C
Expert Reply:
Hi there Donna! I'd be happy to help you find the right replacement light for your Lakota horse trailer! We don't have one that measures exactly 6 inches long by 2 inches wide, but we do have the Optronics LED Trailer Tail Light # STL12RB which sounds pretty close to what you're describing. It has 6 LEDs in an oval housing and measures 6-1/2 inches long, 2-1/4 inches tall, and 1 3/4 inches deep. It's a pretty common style of light used on trailers, so there's a good chance we're looking at something similar to what you have now.
This one is a recessed light that mounts with a rubber grommet and works as your brake, tail, and turn signal light. It uses a standard 3 prong plug, so if your trailer already has that connection, hooking it up should be pretty straightforward. If you have blunt cut wires behind your current light, please let me know and we will find another option.
One thing I'd also want to check is whether your original light has a backup light function, since this Optronics light doesn't include that. Does your original light also work as a backup light, or is it just for braking, turning, and running lights?
Product Page this Question was Asked From
Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 6 Diodes - Oval - Red Lens
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- Oval
- Recessed Mount
- Submersible Lights
- LED Light
- 6-1/2L x 2-1/4W Inch
- Red
- Optronics
more information >
Continue Researching
- Q&A: Replacement Torsion Arm Kit w/a 5 on 4-1/2" Lug Nut Pattern for a 3,700 lbs Dexter Versa-Flex
- Q&A: Looking for Horse Trailer Door Latch Replacement
- Q&A: Replacement Trailer Hub for the TDE 46205 with Galvanized Finish
- Q&A: Direct Replacement Water Heater for Atwood Model GC10A-4E
- Q&A: Recommended Electric Winch for 7,000 Pound Boat Trailer
- Q&A: Will Adarac Pro Series Ladder Rack Work With TruXedo Hard Roll Up Tonneau Cover?
- Q&A: Replacement Shock for Dexter Axle 052-003-00
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: How to Install E-Track in 3 Easy Steps



