bing tracking image
Q & A Icon

Installation Difficulty For Dexter Hydraulic Drum Brake Kit On Boat Trailer  

Updated 11/03/2026 | Published 11/02/2026

Question:

Hi there. I was looking at an trailer brake system you guys sell for boat trailers. They are surge breaks and the part number is dx44ur. I was wondering how difficult they are to install. Is there a video or clear instructions or am I asking for it? Should I hire a pro? Im fairly handy, just never have done this. Thanks

0

Expert Reply:

Hey Tony! If you're fairly handy, the Dexter Hydraulic Drum Brake Kit # DX44UR is definitely something you can install yourself without too much trouble. The brake assemblies and hubs are straightforward. The hydraulic lines and bleeding will take a little more time.

Dexter provides installation instructions, and we also have videos showing the installation of similar hydraulic drum brakes and how to bleed the system. I've linked those below so you can see what's involved before getting started. The # DX44UR is a complete setup with pre-greased hubs and drums, brake assemblies, brake actuator, and brake lines.

Does your boat trailer already have brakes, or are you adding them for the first time?

expert reply by:
0
Robin H
DX44UR
DX44UR
(click to enlarge)
Tony G. profile picture

Tony G.

11/3/2026

I’m adding them for the first time as my wife is has been hogging the ram 2500 to pull her horses. ?? I’m left to use a smaller rig that just barely has enough to tow it. However, stopping is how they should really rate trailers! How much can you stop!!!??

Robin H. profile picture
Etrailer Expert

Robin H.

11/3/2026

@TonyG yeah the stopping can be a major issue if it is a smaller vehicle for sure. One thing you want to do before you order the kit is take a look at the axle and make sure you have a brake flange on there. If you don't, you will have to take it to a shop and have them weld one on or replace the axle with one that has brake flanges.
Tony G. profile picture

Tony G.

11/3/2026

@RobinH Thank you. You have been very helpful!
Robin H. profile picture
Etrailer Expert

Robin H.

11/3/2026

@TonyG you're welcome, happy to help! If you need anything else don't hesitate to reach out.

Product Page this Question was Asked From