Weight Capacity of Valterra StayPut Jack Pads

Updated 11/05/2026 | Published 10/31/2026

Question:

How much weight is it rated for? Can it be used to stack under a hydraulic jack on a Class A rig, or is that to much weight?

asked by: Steve W

Expert Reply:

Hey Steve! The Stackers StayPut Jack Pads # VAL53MB are designed to be stacked under RV leveling jacks, including hydraulic jacks like those on your Class A motorhome. Valterra rates its Stackers leveling pads for up to 40,000 lbs of gross vehicle weight on firm, level ground which covers pretty much any Class A out there.

What kind of motorhome do you have?

expert reply by: Robin H

Stackers StayPut Jack Pads
(click to enlarge)

Bill M.

11/5/2026

I bought a set of the 10" square and a set of the 10" X 20" stickers along with the carrying bag. After three solid months of hard use (Ford F-350 and NorthStar truckcamper, ~11,000 pounds total) they are still working. Though two of them are a bit chewed up by rocky ground, and the zipper pull on the tote bag broke on the third use. I need to use the two worst of the chewed up blocks as the bottom layer only since they won't nestle with a block beneath them. You shouldn't plan on using on smooth or painted concrete as they like to jump out as the tire comes into contact. Don't expect the use they bag for ten of the 10x20 blocks. On cold, dark dirty trails it'll be much easier to get closed if you leave a bit of extra space. Next trip I will pack just 5 of the 10x20 blocks and 6 of the 10x10 blocks. I am confident that will take care of all my leveling situations.

Robin H.

11/5/2026

@BillM sounds like you've really put those Stackers to the test! Good to hear they're still holding up after three months of use. Thanks for sharing the tips on stacking, storage, and different surfaces!