Looking For Suspension Equalizer Replacement For 2007 Eclipse Attitude Toyhauler RV 33AKS

Updated 10/23/2026 | Published 10/20/2026

Products Featured in This Question

MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase - 8K

(913)

$378.24

Suspension Upgrade Kit for MORryde Equalizers - Triple Axle - 3-1/8" Long Shackle Straps

(2330)

$181.82

Question:

i have an 2007 attitude toyhauler 33AKS model.. i need to replace equalizer, its a 3 axle trailer.. do you have a kit for this trailer?

asked by: Jose G

Expert Reply:

Good morning Jose!

Yes we definitely do. For your 2007 Attitude 33AKS triple-axle toy hauler, I'd recommend the MORryde Shock Absorbing Equalizer Kit # MR59ZR. This kit is designed for triple-axle trailers with 33" axle spacing and should be a great upgrade over your original equalizers.

I'd also recommend the MORryde Suspension Upgrade Kit # MR26ZR, which includes heavy-duty shackles, wet bolts, and bronze bushings to replace your older suspension hardware. This allows you to grease them and keep them quiet and moving properly, whereas if you have the factory non-greaseable setup, it is noisier and doesn't last quite as long.

I'm pretty confident these will work for your trailer since most of the mounting hardware uses standard 9/16" bolts. However, I'd still like to verify a couple of measurements. The MORryde equalizers measure 6-1/2" between the lower mounting holes, and a small difference from your originals is generally okay as long as the suspension geometry still works.

Could you measure your existing equalizers and shackle straps (center of hole to center of hole)? That'll help me confirm everything before you order. The shackle kit above uses 3-1/8" shackles, but we also have a version for 2-1/4" shackles if needed!

expert reply by: Andrew N

MORryde MR26ZR
(click to enlarge)

Jose

10/23/2026

I measured my hangers center axle is 34 inch ( eye to eye )& front & rear axle hanger 29.5’’ (eye to eye) . My leaf spring measure around 26’’ with load on so maybe they measure 25.5 around there just a guess.. axle spacing 33 inch. Am looking at this kit K-71-360-00 ? Will this kit work?

Andrew N.

10/23/2026

@Jose Hey Jose! Yes, the Dexter Suspension Kit # K71-360-00 will work just fine for your toy hauler! Your 33" axle spacing and hanger measurements line up with this kit, so it looks like a great fit based on everything you've told me. Plus, it includes the equalizers, heavy-duty shackles, wet bolts, and bronze bushings for a complete suspension upgrade.