bing tracking image
Q & A Icon

What Rear Sway Bar Fits A 2008 Georgetown on Ford F-53 22,000 Lb Motorhome Chassis?  

Updated 09/17/2026 | Published 09/11/2026

Question:

I am inquiring about purchase and installation on a rear , rear sway bar on a 2008 Georgetown F 53 22000 pound chassis and

0

Expert Reply:

Hello Larry,

Thanks for writing in!

Yes, you will want the Roadmaster Rear Anti-Sway Bar # RM-1139-149 for your 2008 Forest River Georgetown on the Ford F-53 22,000 lb chassis. It fits models with either the V8 or V10 engine and has a 1-5/8" diameter bar to help reduce that side-to-side sway and body roll you feel from wind, passing trucks, and uneven roads.

One thing I really like about this setup is that it installs in addition to your factory sway bar, so the factory bar stays right where it is. There is also no drilling through the vehicle frame required for installation. I attached an image showing what it looks like installed.

There is one measurement you will want to take before ordering. The installation adds a 1/2" plate under your factory rear axle U-bolts, so measure the available thread on your existing U-bolts and account for that additional 1/2". If they are not long enough, you will need # RM-590050-00 if you have square U-bolts or # RM-590050-10 if you have round U-bolts.

If you don't want to tackle the installation yourself, I also attached our dealer locator. You can use that to find an installer in your area and have the work done for you.

If you are looking to make your Georgetown feel more planted and easier to control going down the highway, this is one of my favorite upgrades to start with.

Is the biggest issue you are having side-to-side sway, or are you also getting quite a bit of wandering and steering correction?

expert reply by:
0
Kate F
Roadmaster Rear Anti-Sway Bar - 1-5/8" Installed on F-53
Roadmaster Rear Anti-Sway Bar - 1-5/8" Installed on F-53
(click to enlarge)
John B. profile picture

John B.

9/17/2026

I installed on my Jayco 27A F 53 chassis. Took two people to install but the installation was straight forward. Impact wrenches are a must. Added stability to rear rear of the unit.

Kate F. profile picture
Etrailer Expert

Kate F.

9/17/2026

@JohnB Thanks for the response John! Adding this sway bar sure does wonders, it's no wonder you feel the difference!
Chuck F. profile picture

Chuck F.

9/17/2026

The Roadmaster sway (anti-sway) worked well for our 2018 Canyon Star. It adds a more stable feel in our drive. Best wishes for you!!

Kate F. profile picture
Etrailer Expert

Kate F.

9/17/2026

@ChuckF Nice to get rid of that body roll. Thanks for the response Chuck!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>