bing tracking image
Q & A Icon

What Could Cause Two Sets Of MORryde U-Bolts MR66ZR To Break Within A Weeks Time?  

Updated 09/09/2026 | Published 09/04/2026

Question:

What grade are your Ubolts. I replaced brakes, hubs, springs, shackles, bushings,tandem,and Ubolts this spring and on my 3rd axel I had both side break within a weeks time

0

Expert Reply:

Hey Donald, thanks for reaching out, and sorry to hear about your U-bolts braking. That must have been frustrating.

Having both U-bolts on the same axle break within a week of each other is definitely something I’d investigate before replacing them and heading back out. The Morryde # MR66ZR bolts are Grade 5, so they are not inherently light-duty hardware. MORryde designed them for 3" axles.

My first suspects are incorrect torque, the U-bolts loosening after the suspension settled in, or movement between the axle, spring, and tie plate. The 1/2" MORryde U-bolts call for 45-70 ft-lbs, and U-bolts need their torque rechecked after initial use because the new suspension components settle. Since you replaced basically the entire suspension this spring, I’d also inspect that third axle for a bent/misaligned spring seat, tie plate, spring center bolt, or anything else allowing the axle to shift. Two failures on the same axle makes me suspicious that something specific to that axle is putting extra stress on those U-bolts rather than this simply being two bad bolts.

What kind of trailer are you servicing?

expert reply by:
0
Jesse M
MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles - Qty 4
MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles - Qty 4
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>