bing tracking image
Q & A Icon

Fifth Wheel To Gooseneck Adapter for CM Flatbed with 13" x 13" Opening  

Updated 09/05/2026 | Published 08/30/2026

Question:

I have a CM Flat Bed the opening is 13“ x 13“ and my ball inside the opening is a fixed ball. I am trying to find a fifth wheel hitch that will attach to that. Do you guys carry anything that will work?

0

Expert Reply:

Hi John!

Sadly, we do not have a fifth wheel hitch that will fit into a 13" x 13" recessed opening in a CM flatbed and attach directly to your fixed gooseneck ball. The fifth wheel hitches we carry that mount over a gooseneck ball generally require a larger recessed opening because of their footprint. You need the Convert-A-Ball Cushioned 5th Wheel to Gooseneck Adapter # CAB-C5G, which can work with a recessed gooseneck ball and requires a 7" x 7" opening around the ball. It bolts directly to the fifth wheel trailer’s king pin and connects to a 2-5/16" gooseneck ball, with 12" to 16" of adjustable height. It adapts your king pin to work with the gooseneck ball in the flatbed.

The main thing we will want to confirm before recommending the adapter is your trailer’s pin box, since the CAB-C5G is not compatible with certain pin boxes, including Curt Rota Flex and other pin boxes with a swinging plate.

Do you know what pin box you have, and is your gooseneck ball a 2 5/16" ball?

expert reply by:
0
Heather A
John H. profile picture

John H.

9/4/2026

So I have a 2016 Jayco eagle HT 26.5 BHS I’m not sure but I know that it has the Moore ride rubber pin box! Right now I am using the Andersen ultra that mounts in the back of my flatbed however, it makes the front of the RV ride a little too high and I want something that I can get a little more level with. I have read some things that doing one of these attachments can cause some frame cracking. would it be better just to replace the head on the fifth wheel to one of the gooseneck style boxes?

Robertb profile picture

Robertb

9/5/2026

@JohnH I'm not sure that a Convert-a-Ball will work for you. It extends a minimum of 12 inches below the trailer king pin. You may need to custom fabricate an adapter but getting it DOT approved will be a big snafu. I used a Convert-a-Ball in a loaner truck while my transmission was being replaced under warranty. It worked well and seemed to be secure.
John H. profile picture

John H.

9/5/2026

@Robertb so what was thinking instead of and adapter is replacing the entire pin box with a gooseneck style pin box if that would work something like the B&W 5th Wheel to Gooseneck Pin Box!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>