bing tracking image
Q & A Icon

Will the AirLift LoadLifter 5000 part # AL23FJ Fit a 2021 F-250 with a Factory Puck System?  

Updated 08/14/2026 | Published 08/08/2026

Question:

Will this air bag suspension kit fit on my 2021 Ford F250 Super Duty with the fifth wheel puck system installed? If not, which kit do you recommend?

0

Expert Reply:

Hi Rich,

The AirLift LoadLifter 5000 Air Helper Springs part # AL23FJ will for sure fit your 2021 Ford F-250 Super Duty! They are also compatible with in-bed fifth wheel hitches which means they won't install in a plate that will interfere with where your fifth wheel hitch installs in your truck bed. Thankfully, these air bags are a no drill installation because they're going to replace your factory jounce stop, so they'll bolt right into location. I've linked a video to this kit being installed on a 2022 Ford F-250 so you can follow along or just get a better idea of how the install will go.

The # AL23FJ air bag kit can handle pressures up to 5-100 psi which makes them easily adjustable to work best with whatever weight trailer you're towing or load you may be hauling. If you need an on-board compressor to go with your air bags, I suggest using the Air Lift WirelessONE Compressor System part # AL25980EZ. This compressor system comes with a pre-assembled bracket and U-bolt so you can easily bolt the compressor to the frame instead of needing to drill into the frame. It is a single path compressor so it can inflate or deflate both air bags simultaneously and has three memory settings you can use to automatically adjust the pressure. It comes with a remote you can keep in the cab to make adjustments or if you prefer you can use the Air Lift app to make changes right from your phone!

What are you towing or hauling that you'd like extra load support for?

expert reply by:
0
Claire H
Air Lift WirelessONE Installed
Air Lift WirelessONE Installed
(click to enlarge)
Randy profile picture

Randy

8/13/2026

I had this kit on my 2021 super duty with the puck system and towed 12000+ mi with it. I highly recommend it.

Claire H. profile picture
Etrailer Expert

Claire H.

8/13/2026

@Randy Thanks for sharing! Great to hear it worked so well on your Super Duty, especially after 12,000+ miles of towing. We really appreciate the recommendation!
Emmett profile picture

Emmett

8/13/2026

To add to this I have bought and used two sets with zero issues. My 2010 Ford F250 and 2020 Ford F250 but with a B&W hitch system. My friends seem to wrestle with leaks but I have had no problem. I just make sure when routing the lines they don't rub anywhere and have room to move with the suspension. I didn't go the compressor route because of cost and I'm a tight wad! I just didn't have to touch them that often. I carry a Ryobi 737 18v hand held compressor to adjust them. I like being able to adjust my pickup squat so my lights aren't a problem at night mostly but I have been able to address ride with some success also. I just got a new Ram 2026 2500 and have been weighing the Timbren route but haven't bit yet. The 5000 just gave me lots of adjustment options. When I got where I was going I would just touch the stem and let the air out and we were back to factory. My rig would level at 30 to 40 psi but I got in some really rough roads in Colorado and my wife as about to unhinge and I pulled over and put the at 70 and had her smiling again. With the compressor I could have adjust on the fly but for me the cost and added complexity just didn't compute. If I were to but the 5000 again the only thing I might change is using a T to put both bags on a single line so they could stay equalized so if they leaked it would effect both the same. I just routed mine back to my license plate and mounted them there. Party On!!

Claire H. profile picture
Etrailer Expert

Claire H.

8/13/2026

@Emmett Thanks for sharing all that! Sounds like you've gotten a lot of good use out of the Air Lift 5000s over the years. Keeping the lines routed away from anything that could rub is definitely key. And honestly, the handheld Ryobi sounds like a pretty simple solution when you aren't adjusting them all that often. Congrats on the new Ram 2500, too!
Mj profile picture

Mj

8/13/2026

Rich, I bought the Airlift 5000 for my 2022 Ford F250 and I have the B&W Champion with w/slider. The system works great, you will not be disappointed.

Claire H. profile picture
Etrailer Expert

Claire H.

8/13/2026

@Mj Thanks for sharing! Great to hear the Air Lift 5000 works so well on your F-250 with the B&W slider. Sounds like it's been a solid setup for you!
Richard profile picture

Richard

8/14/2026

I installed on my 2020 f250 with B&W gooseneck and no problems will note that once installed and the bed is empty the backend is a little higher then stock so the front is pointing downwards just a little.

Claire H. profile picture
Etrailer Expert

Claire H.

8/14/2026

@Richard It sounds like the air pressure just needs to be reduced a little, so the rear end won't sit high. As long as the pressure doesn't drop below 5 psi, you'll be good.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>