Is There a Custom Wiring Harness for 2026 Kia Sportage?
Updated 07/29/2026 | Published 07/24/2026 >
Products Featured in This Question
Question:
I am looking for a wiring harness for a 2026 Kia Sportage. Do you have one figured out and just not listed? Since the 2027 are hitting the dealer lots, i figure this should be a done thing.
asked by: Duwayne O
Expert Reply:
Hey Duwayne,
After looking through our inventory as well as multiple manufacturers, I can confirm there is not a wiring kit available specifically for the 2026 Kia Sportage available yet. Typically, when vehicle manufacturers change the plugs from one model year to another, the wiring harness manufacturers have to start from scratch with acquiring the new vehicle, testing all of the electrical components, and manufacturing. It's probably that a harness is on the way for the 26 Sportage, but as of now there is no estimated arrival for them.
Because of that, you will need to use the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. This wiring harness is a universal kit and will need to be spliced in. It does come with quick connect snap connectors like TowSmart Wire Splice Connectors # TS67QR, but I highly recommend going with a more secure butt connection like Deka Heat Shrink Butt Connector # DW05744-10. The butt connection does require a crimper like # PTW30764 to install it, but it will last you much longer and provide a better connection. All in, this is a fairly simple install, but it will probably require you to remove some panels or taillights, so if that's not something you feel comfortable with, you could check with one of our trusted installers in your area using the link below.
If you're also needing a trailer hitch, you'll want to go with our etrailer Trailer Hitch Receiver # e38KR. This custom-fit hitch will allow you to tow up to 3,500 lbs. or carry 525 lbs on the tongue, but you'll want to consult your owner's manual to double check your maximum ratings in case they're lower than the hitch's ratings. The install will be pretty straight forward with a bolt-up installation and no drilling required, but you will definitely want a second set of hands to help with the install. This hitch will be great both for towing trailers and carry bikes or cargo.
What do you plan to tow with your 2026 Sportage? Are you planning a trip or just getting the wiring to be prepared for the future?
Product Page this Question was Asked From
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- Universal Fit
- 4 Flat
- Plug and Lead
- Splice-In
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Hitch and Wiring for 2027 Kia Telluride
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Is There a Trailer Hitch that Fits 2026 Toyota RAV4 Hybrid
- Q&A: Recommended Hitch and Trailer Wiring for a 2026 Toyota RAV4 Hybrid
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Will Curt Hitch Fit 2026 Hyundai Santa Fe Hybrid
- Q&A: What Hitch and Wiring Will Fit My 2026 Subaru Outback Wilderness?

