Confirming the Correct Slipper Leaf Spring for Your 2021 Triton Jet Ski Trailer
Updated 07/22/2026 | Published 07/18/2026
Question:
Will this work for the below question SP-179275/e69SR ? I am needing to replace a bent leaf spring on a 2021 Triton trailer used for a jet ski. The VIN is . The GVWR is 1980lbs GAWR 1500lbs it is a 4 leaf sprint with a flat end.
asked by: Tray J
Expert Reply:
Hi Tray, I'd be happy to help with that. The VIN sadly doesn't tell us which leaf spring your Triton trailer uses, so I can't confirm whether the etrailer slipper spring part # e69SR is the correct replacement just yet. I would need to know the axle capacity of your Triton trailer and the measurement of your existing spring from the center of the eye to the very end of the spring while it's unloaded.
For example, the 4 Leaf Slipper Spring with Radius End, part e69SR that you were looking at, is designed for a 2,000 pound axle and measures 24-5/8 inches long, so getting that measurement is important to make sure we're matching the correct spring.
For a Triton trailer with a 1,980 pound GVWR and a 1,500 pound GAWR, the most common axle capacity is 1,500 pounds, but I'd still like to verify that so we make sure you get the correct slipper spring for your trailer.
Once I have those two pieces of information, I'll be able to confidently recommend the right replacement so your trailer tows straight and your jet ski rides safely.
By the way, where do you usually take your jet ski, the lake, the river, or the coast?
(click to enlarge)
Product Page this Question was Asked From
4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 2000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 24-5/8 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: What Bracket Kits Will Allow CE 19504-2 Fenders To Mount To Shorelander Boat Trailer?
- Q&A: Looking for Replacement Wet bolt for 2020 Bighorn 3300DL
- Q&A: Replacement Leaf Springs For An Ice Shanty Trailer
- Q&A: Replacing Slipper Springs on Boat Trailer for 3,500 lb Axle
- Q&A: Replacement 2,500 lbs - 3,500 lbs Axle w/a 86.5" Hub Face and a 68.5" Spring Center
- Q&A: Installation of Slipper Spring with Open Eye End
- Q&A: Replacement 1-3/4 Wide 25-1/2 Long Slipper Leaf Spring
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Most Popular Wheel Bearings
- Article: How to Measure a Trailer Axle
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
Tray J.
7/22/2026
Hello heather. I spoke with Andy yesterday and confirmed that is the correct part based off of measurements. I ordered it yesterday. I used it mainly fresh water on lake in Tennessee. I keep it on a lift on my dock but put it on trailer in tbt garage in winter