Replacement for Shelby Bolt-On Swivel Jack On 2005 Triton Trailer

Question

Question:

I have a 2005 Triton trailer model ATV 128 part 0501145 tongue jack. The bolt pattern is 6 inches. Do you have something compatable?

asked by: Wayne T

0

Expert Reply:

Hey Wayne! It looks like that is an old Shelby bolt-on jack with a 1,500 lb capacity. The measurement that matters here is going to be your frame height.

For a replacement, I recommend the etrailer Sidewind Aluminum Jack with Wheel # e95YV. This has the same 1,500 lb capacity, and aluminum construction, and has the option of being drill powered with the included attachment. This is designed to fit frames 2" to 4" tall.

What are you hauling on your ATV 128?

expert reply by: Robin H

0

etrailer Sidewind Aluminum Jack
(click to enlarge)

Wayne T.

7/24/2026

This attaches to the spare tire holder. The bolt pattern is 6"X6". Do you have the a tongue jack that fits? Thanks, Wayne

Robin H.

7/25/2026

@WayneT I see now, looks like a Triton specific part off of an old Pro Series. I don't think you're going to find that, especially since the company that made those is for sale and their parts aren't around. I would just bolt on a different jack instead. If you need that mounting plate to hold the spare tire carrier then leave it attached.

Answer 1

Hey Wayne! For that kind of garage setup, I’d look at the etrailer Sidewind Aluminum Jack with Wheel - Swivel Bolt - 1.5K #e95YV. It gives you the wheel you need for nudging the tongue around by hand, but it also includes a 19mm socket so you can…

view full answer...

Answer 2

Hey Dan! Yes, the BTBRV Trailer Jack Foot Scale #BTBRV014 comes with the carrying case pictured below. It is not designed to remain installed on the trailer while you're driving. We include the case to keep it protected while it is stored in your…

view full answer...

Answer 3

Hey Jason! You can definitely use the two together. The etrailer Anti-Rattle Hitch Collar #e38FV installs at the hitch receiver. The alignment collar on the Benton MoveHitch #B86VR and #B38VR (with cargo net) just helps you line it up with the hitch…

view full answer...

Answer 4

Hey Jack! The Big Truck Big RV Trailer Jack Foot Scale #BTBRV014 has a +/- 5% full scale accuracy and displays weight in 50-lb increments up to 2,000 lbs.. It provides a quick and reliable way to verify your trailer's tongue weight before towing.…

view full answer...

Answer 5

Good morning Steve! For a boat trailer jack where you still want a wheel, I’d use the etrailer Sidewind Aluminum Jack with Wheel - Swivel Bolt - 1.5K #e95YV. That one gives you a 1,500 lb capacity, 12" of travel, and a built-in wheel so you can…

view full answer...

Answer 6

Hey Howard, this is a really interesting question but the pin of the Big Truck Big RV Trailer Jack Foot Scale with Tongue Weight Gauge #BTBRV014 is not a part of the function of the scale so you don't have to use it for the scale to work. Its so…

view full answer...

Answer 7

Hi Eric! The Dylux RV Tankless Water Heater #DY54FR does have auto frost protection, which activates when the temperature drops below close to freezing temps. That’s a helpful feature for chilly nights while the RV is in use. I would not treat that…

view full answer...

Answer 8

Hi Angela! Yes, it will. The etrailer Cargo Carrier Bag #988501 measures 59" x 24" and was designed with 60" x 24" cargo carriers in mind. This will fit nicely on the Benton MoveHitch #B86VR, and will keep your camping gear…

view full answer...

Answer 9

Hello Phil! The jack foot on the BTBRV Trailer Jack Foot Scale #BTBRV014 is designed as part of the scale and does not affect its accuracy. Simply install it in place of your trailer jack foot, lower the jack onto a firm, level surface, and read the…

view full answer...

Answer 10

Hey Mike! For a wet boat trailer environment, I’d go with the etrailer Sidewind Aluminum Jack with Wheel - Swivel Bolt - 1.5K #e95YV. This one is built with an aluminum body and stainless steel hardware, so it’s a better fit around water than a…

view full answer...

Answer 11

I sure do Steve! To replace your Triton boat trailer's jack, I recommend our etrailer Sidewind Aluminum Jack with Wheel item #e95YV. This is a 1,500 lbs capacity jack, that will provide 12" of travel, and has a built-in wheel for easy moving…

view full answer...

Answer 12

Hey Brian! The BTBRV Trailer Jack Foot Scale #BTBRV014 is not designed to live on your trailer jack permanently. If you're traveling or storing your trailer you definitely want to remove it and replace it with your standard foot. If you're at…

view full answer...

Replacement for Shelby Bolt-On Swivel Jack On 2005 Triton Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching