Recommended 30" Long Slipper Spring that is 2" Wide and has a 5/8" Diameter Mounting Eye
Updated 06/28/2026 | Published 06/18/2026 >
Products Featured in This Question
Question:
I have an old 1972 camper and I need to replace the leaf springs, but Im having a hard time finding the same size and was hoping you would be able to help me. They are hook down slipper springs, 2 wide. 4 leaves, measuring 1-1/8 thick Eye diameter 5/8 id. Axle location is 13 but when using a fabric measuring tape from the eye to the center, it measures 14 Overall length 28 using a fabric measuring tape, it was 30 Spring arch 4-3/4 Most of the springs I can find have a 9/16 eye diameter. Please let me know if you need any other measurements/information. Thank You,
asked by: Cory D
Expert Reply:
Hey Corey thanks for the information! We only have one 2" wide slipper spring with a 5/8" eye diameter. It's the Dexter 6-Leaf Slipper Spring for 9,000-lb Trailer Axles item # DX83QR. The slipper end is flat.
The Dexter 6-Leaf Slipper Spring item # DX83QR measures 30" long from the center of the spring eye to the end of slipper part of the spring. From the center of the eye to the center bolt is right at 13-1/4". The flat length, following the curve of the leaf spring from the eyelet to the center is 14". The arch measurement is 3.84”.
What brand and model camper do you have?
You can add this information, along with any other questions you have, where it says Add Comment.
Product Page this Question was Asked From
Dexter 6-Leaf Slipper Spring for 9,000-lb Trailer Axles - 30" Long
- Trailer Leaf Springs
- Slipper Springs
- 5/8 Inch Eye
- Rubber Bushing
- 9000 lbs
- 2 Inch Wide
- 6 Leaf
- 30 Inch Long
- Standard Grade
- Dexter
more information >
Continue Researching
- Q&A: Are Dexter Axle Leaf Springs Made in the USA
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Front Mounted Trailer Jack For Cattle Trailer
- Q&A: Replacement Double-Lip Seal for Lippert Part 122088 with 2.250" ID and 3.376" OD
- Q&A: Are There Long-Term Service Contracts To Use PingMaster Trailer Tracking Devices?
- Q&A: 2015 Palomino Sabre 36QBOK Brakes and Bearing Recommendation
- Q&A: Recommended Replacement Grease Seals for an 8k Dexter Axle
- Q&A: Recommended Triple or Quad Axle Suspension for Trailer Build
- Article: Where to Position the Trailer Axle?
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle



Cory D.
6/22/2026
Its a Layton pull behind camper. I can't find information on the actual model. The length with tongue is 14'. The camper is 11' 4" and width is 7' 2". The axle is a drop down that is 2- 3/8". From what I'm finding, the axle would be a 3500 lb. I don't have the ability to weight it. From what I'm finding, 2" wide leaf springs are for much heavier axles.