bing tracking image
Q & A Icon

The Bolts Supplied With My Trailer Hitch Seem A Bit Too Large - What Can I Do?  

Updated 04/29/2026 | Published 04/27/2026

Question:

The bolt supplied for the TMT87FR is a little too large for my 2017 Toyota tab 4 even though it says it’s a fit. What should I do

0

Expert Reply:

Hey Joe, thanks for reaching out. What’s going on here is the factory weld nuts in the frame are dirty or corroded, not a bolt size issue. The bolt will start to thread and then bind up, which makes it feel like it’s too big, but the threads in the frame just have buildup in them. This is actually fairly common on vehicles that are a few years old.

The fix is to clean the weld nuts out. Hit them with a penetrating oil like PB Blaster and run a wire brush or thread chaser through the hole to break up the rust and debris. A small wire brush on a drill makes it a lot easier. It may take some time and multiple passes, but once the threads are cleaned out, the supplied bolts will thread in smoothly without forcing anything.

I have actually never heard of a trailer hitch shipping with the wrong size bolts. It's always the weld nuts.

What will you be using the hitch for once you get it installed?

expert reply by:
0
Jesse M
Trailer Mate Trailer Hitch Receiver - Custom Fit - Class III - 2"
Trailer Mate Trailer Hitch Receiver - Custom Fit - Class III - 2"
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>