Looking for Replacement Manual Crank Handle for Atwood Electric Camper Jack

Updated 03/25/2026 | Published 03/22/2026

Question:

I have a 2008 Lance 845 truck camper and it has the Atwood electric jacks model number 86065. Unfortunately, I’m having problems with the electrical and I need to be able to raise and lower the electric jacks manually, however, the socket is missing, I’m unable to get depth or width measurements of the socket because unfortunately the camper is in a storage facility far away from me, I don’t see an option here to attach a photo? I have a picture of the Jack opening and model number, is there somewhere I can attach a photo so you can see it? I’m looking for a socket that I could use manually for this model of Jack.

asked by: Chris D

Expert Reply:

Hey Chris, you can email me back with your picture but since you have an Atwood jack the replacement crank handle part # LG-119226 would be what you'd need. Check out the picture I attached to see what it looks like and you should be able to pretty easily be able to tell if this is the style of manual crank you'd need.

expert reply by: Jameson C

Manual Crank
(click to enlarge)

James

3/25/2026

Too long and will not work with camper hooked up. I had to rotate the drive head 180 degrees on the unit to access the socket, worked fine .

Chris D.

3/25/2026

Ok unable to attach the photo of my Atwood jacks but I’m thinking this looks like it’s probably it, I’ll just go ahead and get that order. Appreciate it. Thank you.