Replacement Hardware for etrailer Hitch on 2010 Crown Vic

Question

Question:

What replacement bolt kit do I need to purchase for a 2010 crown Victoria.

asked by: Kevin

0

Expert Reply:

Hey Kevin! I'm assuming you have the etrailer # e66AR since that is what you were looking at. You will need the Replacement Hardware Kit for Trailer Hitches # RHK. All you need to do is enter e66AR in the "Hitch Item Number" box and add it to your cart.

What will you be using the hitch for?

expert reply by: Robin H

0

Replacement Hardware
(click to enlarge)

Capsie

2/19/2026

The kit made it easy to reuse a hitch i got from the junk yard and all I had to do was watch a YouTube video to install it

Answer 1

The part number you would need for ordering a replacement hardware kit for your Curt hitch part #C12130 is the part #RHK. On the product page for the RHK you need to type C12130 in the "Hitch Number Box" and addit to your cart. Once…

view full answer...

Answer 2

Yes, the etrailer Trailer Hitch Receiver item #e66AR comes with all the necessary hardware to install this hitch to your 2000 Mercury Grand Marquis. If you need a wiring harness to control your trailer's lights you will want the Curt Powered Tail…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Replacement Hardware for etrailer Hitch on 2010 Crown Vic

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching