Video Transcript for Review of Thomas Payne RV Couches and Chairs - Sleeper Sofas - LC64FC

Hi everyone, Steve here with etrailer. Today we're looking at our Thomas Payne Trifold RV Loveseat. Folks, this is an 80-inch long, it's a three seater technically, and we're calling this a back granite. Now this is a trifold sofa that will convert it to a bed in three simple steps, and you're just gonna give you an additional sleep and surface. So it's a simple pullout bed with foldout legs, and then you simply push the sofa back, rest forward until flat. So let's take a look at that.

Before I fold it out, I do wanna show you a little bit of closeup here from a different angle, different lighting. This is that black granite we're talking about. It's a very nice comfy sofa. The cushions are actually pretty soft and that upholstery finish here. Water and drinks and stuff, if you spill, will just bead right up and off.

So very nice, nice and thick. You have a hook and loop, that's what's gonna hold onto the hook and loop on the backside. So I'm gonna remove all of these real quick and then we'll fold this out into the bed. Now this is sitting flush against my back wall, if you're curious about that for our space. And before we fold it out, actually, let's go over some quick dimensions.

So I did measure this from the top with the cushions on. It was about 38-3/4-inches tall. And then the width of this right now as a couch is 34-inches wide, 80-inches long. Now we're gonna go ahead and fold this out. It's as simple as pulling up in the middle.

Then once you get here, you've got two legs, one on each side, you're gonna simply fold them out. These legs actually have two adjustment holes in them, and that's because if you have this on like a slide out, you may have a floor height difference. But from here, probably use it with two people. But you simply pull it up out, lay it down like so. The back just simply hinges down flat. Now, when I had it fully out like this as a bed, I got 72-inches or six feet from the wall. And again, that is flush against the wall. Now whenever you get this out of the box, it may or may not have the feet on it. You may have to screw those feet in place. And you're gonna have two four bolts with hardware that this hinges on. That'll go through the frame on those hinges, and that's what's gonna let this pivot up and down. So again, from here you can lay down, use as a bed, very nice, very comfortable. And to put it away, simply lift the back up, hold this back in, hold the other side back in, hold this down flat. And then from there you simply put your cushions back in place and they are curved left and right to match up over arm rest. And it truly is that simple, folks. So just like that, we've converted our sofa loveseat, 80-inch wide into a bed and then back into a usable seatble surface. Folks, I'm Steven with etrailer. As always, if you have questions about this or any other product, reach out to us. We're here to assist you, more than happy to help do so. Have a good one.