U-Bolt Spare Carrier for Karavan Trailer KCB 1800

Question

Question:

Will this work for a hub on the Karavn trailer KCB 1800? 13 inch wheel? Thank you

asked by: Jeff

0

Expert Reply:

Hey Jeff, yes the Tie Down U Bolt Spare Carrier part # TD38FR that you referenced will work great with a 13 inch spare like what your Karavan KCB 1800 has. This basically works with all trailer wheel sizes between 8 and 15 inch.

expert reply by: Jameson C

0

Jameson C.

1/19/2026

Hey Jeff, how did the Tie Down U-Bolt spare tire carrier work out on your Karavan trailer? Knowing how it fit with your 13-inch wheel could help others looking at the same setup.

Answer 1

Thanks for the pics Kemo, they really helped! The CE Smith Single Axle Trailer Fenders #CE19504-2 are larger than what you currently have and use a different mounting style. Based on your setup, the CE Smith Fenders wouldn’t bolt onto your existing…

view full answer...

Answer 2

The difference between the two rim designs you mentioned is just a visual difference. The mini mod wheels are a white rim that have small circles that run around the mounting flange of the rim whereas the other white style you referenced has…

view full answer...

Answer 3

Hey SC. So long as you can find an open spot on your frame or tongue and have tires 15" or smaller with a 4 or 5 lug nut pattern the Tie Down U-Bolt Spare Tire Mount w/ Brackets item #TD38FR will work. It clamps around 3" wide frames so…

view full answer...

Answer 4

Hello Johnny, thanks for reaching out. The bracket that goes with the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps CE19504-2 is our part number #PF1135-BKT-2. The brackets are 2-3/4" wide x 13-1/4" long. I have included a…

view full answer...

Answer 5

Choosing the correct Timbren Axle-Less system will depend on a few things. First will be the weight capacity needed. Going off the 1,000 pound load you could be going up to, I am going to suggest a 2,000 pound set up. That being said, these do have…

view full answer...

Answer 6

Hey Lawrence. For a pair of fenders that fit 14" wheels, I recommend the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps item #CE19504-2. These plastic fenders have textured tops and sides to give you a secure place to step. They…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

U-Bolt Spare Carrier for Karavan Trailer KCB 1800

Product Page this Question was Asked From

Continue Researching