Does the 4-way on a 2013 Ram 1500 Have Separate or Combined Taillight Wiring

Published 06/25/2014

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector

(767)

$40.09

Hook Probe Circuit Tester

(70)

$12.41

Question:

I have a 2013 Dodge Ram 1500, it has a 7 way and 4 way plug on the back for trailers. With this 7 way to 4 way adapter take the place of installing an electrical turn signal converter on the vehical?

asked by: Travis W

Expert Reply:

Since you already have a 4-way and a 7-way the Curt Wiring Connector part # C55384 that you referenced would only provide you with an additional 4-way on your 2013 Ram 1500. The 4-way on your vehicle should already have the tail light circuits combined.

I would recommend you test the circuits of the 4-way you have with a circuit tester like our part # PTW2993 to verify the circuit configuration. It should already have combined circuits. If for some bizarre reason the 4-way has a different wiring configuration but the circuits of the 7-way have combined circuits then yes, the # C55384 would give you a 4-way with combined circuits to match your boat trailer.

I attached an FAQ on trailer wiring that you may find helpful as well.

expert reply by: Jameson C