Looking for Leaf Spring Solution for Converted Kayak Trailer
Updated 12/08/2025 | Published 11/13/2025 >
Products Featured in This Question
Question:
I bought this trailer, it was a seadoo trailer and it has been modified A LOT. So anyway, I going to put on new leaf springs, but from center to center is is measuring 30.25. Im making a Kayak trailer out of it. Im thinking that Im going to have to move the hangers, can you give me some advice?
asked by: Darrel D
Expert Reply:
Hey Darrel, we do not have any leaf springs that are close to 30-1/4 inches so yeah you are going to need to move the hangers to a closer distance to use a spring like the # DX93CR which is 20-7/16 inches long.
If you need a hanger kit to replace what you have we have the part # APS4 which comes with everything you'd need.
Product Page this Question was Asked From
3-Leaf Double-Eye Spring for 1,400-lb Trailer Axles - 20-7/16" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 1400 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 20-7/16 Inch Long
- Standard Grade
- Dexter
more information >
Continue Researching
- Q&A: Looking For Replacement 7-Way Plug With Double Prong Design
- Q&A: Replacement Hub and Bearings for 1989 Tracker Boat Trailer
- Q&A: Leaf Spring Recommendation for 1996 Calkins Boat Trailer
- Q&A: How Long Is the Buyers Products Straight Tongue Trailer Coupler
- Q&A: Hole Spacing and Channer Dimensions of Buyers Products 3370091560 Trailer Coupler
- Q&A: Does Grease Seal # 34823 Feature a Garter Spring
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Lighting Requirements
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision


Jameson C.
12/8/2025
Hey Darrel, how did things go after you moved the hangers for your kayak trailer? Did the new leaf springs and hanger kit line up the way you needed? Your update could make it easier for the next person working on a similar trailer conversion.