Replacement Bearing Kit for a 2022 Grand Design Transcend Xplor 265BH
Updated 11/13/2025 | Published 10/15/2025
Products Featured in This Question
Question:
I have a 2022 Grand Design explor 265Bh . I need all the bearings and seals to replace on an axle for a spare. Would it be possible to provide this information? Thank you so much
asked by: Jason S
Expert Reply:
Hey Jason. I am going to need some more information from you to get you the correct bearings and seals. I do not have a database I can look up that shows what axles you have on your trailer like you can find on cars and trucks. What you'll want to do is see if one of your axles has a tag still attached to it. If it does go ahead and email a picture of it to the address you receive this response from. If it's still legible I can get what I need off of that tag.
If not you'll need to pull one of the hubs and look at the two bearings. They should have numbers stamped into the sides of them. I'll need those part numbers to identify your spindle size which will tell me what hub you need.
If they do not have numbers stamped into the side you'll need to measure your spindles using a digital caliper like item # PTW80157. I'll need the C and D dimensions shown in the diagram below.
You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
(click to enlarge)
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Bearing Kit for a 2022 Grand Design Transcend Xplor 265BH
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Bearing Kit for 2017 Jayco Jay Flight 17BH
- Q&A: Replacing Suspension On 2020 Keystone 210 URS
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
Jerred H.
11/13/2025
Hey Jason, were you able to find the bearing numbers or measure your spindles with the digital caliper? Once you have that info, I can help confirm the right bearings and seals for your axle. Let me know what you find so we can get you set up with the correct parts.