Replacement Drum Brakes and Actuator for a Venture Model VRT-5400/23 Trailer
Updated 09/12/2025 | Published 08/18/2025
Products Featured in This Question
Question:
Need to replace my drum brakes and coupler on my Venture Model VRT-5400/23 trailer. The drums, all mounting hardware and backing plates are not useable.
asked by: Michael C
0
Expert Reply:
Hey Michael, thanks for reaching out!
According to my research you have 3,500 lb axles so you need the Hydraulic Brake Kit # AKFBBRK-35-D and Mounting Hardware # BRKH10B.
And then for the actuator we're looking at the 12.5K Dexter Actuator # T2478100.
Are you needing to replace your drums as well?
expert reply by:
Jon G
0
Dexter 12.5K Actuator
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Free Backing
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: How To Determine If Boat Trailer has 10 Inch or 12 Inch Brake Assemblies
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: New Brake Assemblies, Hub/Drums, Brake Lines, and Bearing Buddy for Trailer with 3,500 lb Axle
- Q&A: Parts Needed To Add Electric Drum Brakes To Boat Trailer
- Q&A: Replacement Brake Assemblies for Trailer with 10-1/4 inch Drums
- Q&A: How Do I Know If I Have Free-Backing Brakes?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
Jon G.
9/12/2025
Hey Michael, did you get a chance to replace your drums along with the brake kit and actuator? I'm curious to know how everything worked out for you, as it could help others in a similar situation.