Height of PullRite SuperGlide 5th Wheel Hitch

Question

Question:

Wrt PullRight 2714 Superglide Hitch. What is the measurement from truck bed floor to the level hitch sadel? Can the hitch sadel be raised? If it cant, does PullRite offer any adapters to raise the sadel? Thanks for your info. Tom

asked by: Tom H

0

Expert Reply:

Hey there Tom, the PullRite SuperGlide 5th Wheel Hitch # PUL43RR has a hitch height of 17-1/2". This will be from the base to the top of the head when the head is level, the same as what you are describing. PullRite does not offer this hitch with an adjustable height setting, or have a way to raise it up. It is a nice hitch but the height adjustment will have to come from your pin box.

If you want more flexibility, the Demco Autoslide 5th Wheel Hitch # DM8550024 is a great alternative. This is also designed to fit a 2025 Ford F-250 with the prep package. The Demco hitch adjusts from 15-1/2" to 18-1/4" so it will sit a little higher. The PullRite also needs a capture plate no matter what, the Demco only needs one for certain pin boxes.

How has the rest of the work gone on your trailer?

expert reply by: Robin H

0

Demco Autoslide
(click to enlarge)

Tom H.

8/15/2025

Thanks Robin for the info. I currently have a PullRite Superglude #4400 installed on our 2014 GMC 3500. Needed to get Pullrite's 3" Lift Kit for the hitch for clearance. Current bed to level sadel measurement is 18.5" I have a 2026 Ford F-350 on order. Debating between getting the the puck system 4442 &4409 adapters for the 4400 or a new hitch. Want to make sure I have sufficient clearance between to new truck and the fifth wheel before I decide which direction to go. Thanks for the suggestion of an alternative hitch. Will have to look into that one. Still dealing with left front leg issues. Been on the phone a lot with Lippert and have replaced all components without success. Time to take it to a dealership to let an experience tech work on it. Thanks for asking Tom

Answer 1

Hey Mike, congrats on the new truck. The only problem I repeatedly see with covers like the BAK Revolver X4s Hard Tonneau Cover item #BAK99ZR is those straps that hold the cover open tend to wear out. The more you drive around with the cover rolled…

view full answer...

Answer 2

Thanks for reaching out, Lise! I've narrowed down our 2024 Ford F-350 Super Duty tonneau cover options to 3 because they each have something a little different to offer both in function and when it comes to pricing: The BAK Revolver X4s Hard…

view full answer...

Answer 3

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Answer 4

Hey Dan, any time your truck is turning relative to your trailer the slider mechanism will be activated and it will move back. There isn't a way to deactivate that or prevent that from happening.

view full answer...

Answer 5

The MORryde Cushioned 5th Wheel Pin Box #MR84VR weighs right at 190 pounds. Due to this, it will ship freight. Just in case you needed, this is designed to fit 14,000 to 18,000 pound trailers with the Lippert 1621 and 1621HD pin boxes.

view full answer...

Answer 6

Hey Karl, thanks for reaching out. Yes, the PullRite SuperGlide Quick Connect Capture Plate #PUL96RR does come with the basic hardware you need to install it. The 331704 Quick Connect Capture Plate is designed to slip over your king pin box and be…

view full answer...

Answer 7

Hey Shane! That is definitely not a dumb question. The #DM69GV (6077) is fine to use as long as you don't exceed the 18,000 lb GVWR of the toy hauler. Personally, I would go ahead and get the #DM89GV (6107) with the higher rating just to be safe.…

view full answer...

Answer 8

Hey Brian, the adapter you would need to convert your Pullrite Superglide ISR hitch to the OEM pucks of your 2026 Ram 3500 would be the Demco part #DM6099 which converts the OEM pucks to the ISR style of rail your hitch requires. How did you like the…

view full answer...

Answer 9

Hi Robert; are you looking for a replacement 7-way or are you trying to add 5th wheel/gooseneck wiring? The Curt #C69CR you were looking at is designed to replace a 7-way at your rear bumper. If you are trying to add a 7-way to your truck bed for 5th…

view full answer...

Answer 10

Hey Paul, we have great hitch solutions for the OEM pucks of your 2024 Ford F-350 short bed but whether or not you need a slider hitch is going to be based on the design of the trailer you plan to tow. Normally with a short bed truck you need a…

view full answer...

Answer 11

Hey Mike, thanks for reaching out! The 16K PullRite SuperGlide #PUL43RR is an excellent option for towing your Grand Design with your 2025 F-250, and if you lockout your Lippert Turning Point pin box you'll be able to use them together. You…

view full answer...