Are The Drive-In Oil Caps Secure Compared To Thread-In Caps
Updated 08/15/2025 | Published 07/21/2025
Products Featured in This Question
Question:
Hello I am considering purchasing the Kodiak brake kit KOD49FR. My question is the oil bath housing is push on and not threaded. Do you have threaded models? I am concerned it is not as secure as a threaded one. Your expert opinion would be appreciated. Thank you
asked by: Scott M
Expert Reply:
Hey Scott, thanks for reaching out. I see you already ordered the # KOD49FR kit, but I still wanted to reply and address your concern. The oil caps that come with this kit are drive-in. These things are machined down to the thousandth of an inch, so they are quite secure. We do not see issues with them falling out unexpectedly. The only way this could happen is if your hubs are damaged or excessively worn. With new hubs this will not be a problem.
Please let me know if there is anything else you need.
Product Page this Question was Asked From
DeeMaxx Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 3500 lbs Axle
- 14 Inch Wheel
- DeeMaxx
more information >
Continue Researching
- Q&A: Recommended Replacement 10" Disc Brake Kit for a Coyote Trailer for Saltwater Application
- Article: Most Popular Wheel Bearings
- Q&A: What is Difference Between Kodaguard and Dacromet Coated 3,500 lb Kodiak Disc Brake Kits
- Q&A: Disc Brake Kit Recommendation for 3,500 lb Axle and 5 on 4-1/2" Bolt Pattern Idler Hub
- Q&A: Can the DeeMaxx Disc Brake Assembly Be Purchased as a Single Unit Instead of a Pair?
- Q&A: Replacing Knott Brand Brake Calipers And Rotors On A Coyote Boat Trailer With 3,500 lb Axles
- Q&A: Solution for Needing Replacement Disc Brake Componentts for Venture Boat Trailer # VATB-5225
- Q&A: Recommended Electric Over Hydraulic Conversion Kit for a Boat Trailer w/ 3,500 lbs Axles
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Trailer Wiring Diagrams
Jesse M.
8/15/2025
Hey Scott, how are the new brakes working out for you? I'm curious to know if the drive-in oil caps have met your expectations, as this could help others with similar concerns.