Kodiak Disc Brake Kit for Trailer with Lippert 8k Trailer Axles
Updated 08/07/2025 | Published 07/10/2025
Products Featured in This Question
Question:
Good afternoon! I need help selecting a Kodiak disc brake system for commercial transport that runs approximately 10,000 miles per month. Currently, my trailer is equipped with three 8,000 lb Lippert axles with the following specifications: • Stud size: 9/16” • Wheel size: 17.5” • Bolt pattern: 8 on 6.5 • Hydraulic brake assembly: 12-1/4” x 3-3/8”, 4-bolt mount • Compatible with 8K Dexter and Lippert axles • Electric-hydraulic brake actuator: Hydrastar, 1200 PSI I would like to upgrade to a Kodiak disc brake system. Could you please help me find the right configuration that fits my current setup? Thank you in advance!
asked by: Nakit M
Helpful Expert Reply:
Hey Nakit, thanks for all of the details on your setup. It's pretty rare we get that much info but it is really helpful. So the Kodiak disc brake kit you would want is the # KOD67VR which covers everything you are needing and matches everything as well. You'll need three sets of this since you have a triple axle.
Since disc brake setups require higher PSIs than what you have (1,600 psi) you'd also need to replace your actuator with the # HBA16.
Product Page this Question was Asked From
Kodiak Disc Brakes - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 8K - E-Z Lube - Dexter
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Hub and Rotor
- 9/16 Inch Studs
- 8000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: 25580 bearing
- Search Results: tst tpms
- Search Results: 8k disc brake kit
- Search Results: electric actuator
- Q&A: Are Hydrastar Ceramic Brake Pads Interchangeable With Kodiak 250
- Q&A: Replacement Hub/Rotor or Lippert 8K Axle with Kodiak 250 Caliper
- Shop: Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 32 oz Capacity - 1,600 psi
- Video: Kodiak Trailer Brakes KDBC250KIT Review
- Article: Adding Electric Over Hydraulic Disc Brakes
- Search Results: hydrastar
- Search Results: 25580
- Search Results: 175 wheel
- Shop: Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Dacromet - 5/8" Bolts - 8,000 lbs
- Shop: Hydrastar Ceramic Brake Pads - 7,000 lbs to 8,000 lbs
- Shop: Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Shop: Mighty Cord Replacement RV Power Inlet - Twist Lock - 30 Amp - White
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 12" Rotor - 6 on 5-1/2 - 6K
- Shop: Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes - 1,600 psi
- Q&A: Can the Breakaway System Be Wired To The Main Trailer Battery
- Q&A: Recommended Timken Bearing Kit for the Hydrastar Disc Brake Kit
- Q&A: Recommended 6 Inch Oval LED Backup Light For Brightness
- Q&A: Disc Brakes for Sundowner Toy Hauler With Lippert Drum 2420801
- Q&A: Testing The Dexter Electric Over Hydraulic Brake Actuator
- Video: HydraStar Electric Over Hydraulic Disc Brake Actuator Installation
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Video: Let’s Check Out the Voyager Camera Extension Cable
- Shop: Trailer Wiring
Jameson C.
8/7/2025
Hey Nakit, how did the installation of the Kodiak disc brake system go for your trailer? I'm curious to know if the new setup with the higher PSI actuator worked well for your needs. Let me know, as it could really help others in a similar situation!