Can the Peterson Great White LED Trailer Interior Cove Light be Wires in Series

Updated 05/12/2025 | Published 05/04/2025

Question:

How many of these can I wire in series when I replace the single LED strip in my 6 x 12 trailer?

asked by: Kenny W

Expert Reply:

Hey Kenny, thanks for reaching out!

The Peterson Great White LED Trailer Interior Cove Light # 359-3 only has wires on one end, so you'll need to have a wire that goes from the light to your power source and ground for each one.

How long is your current LED strip?

expert reply by: Jon G

Kenny W.

5/12/2025

Thanks for the reply Jon. The single existing strip is about 36 inches long. It has a single wire for power and then a very short ground connecting it to the trailer frame. Right now this light is in the center of the trailer. Ideally I would like between four and eight lights Across the length of the trailer.

Jon G.

5/12/2025

@KennyW Thanks for the extra info - since this is 1000 lumens it will be pretty bright, so you should be able to get a handful of them and place them along the length of your trailer for adequate lighting.