Looking For Inner Axle Seals

Updated 04/23/2025 | Published 04/19/2025

Question:

Hi I’m needing inner axle seals x2 My axle size is 24mm My housing size is 46.5

asked by: Gord E

Expert Reply:

Hello Gord, thanks for reaching out. We may have a seal that will work for you but I would need a bit more info in order to be sure you get the right thing. Typically it is best to clean up the seal and see if you can get the number stamped on the edge. If that fails, you would want to measure the ID and OD of the seal with a micrometer that goes to 1/1000th of an inch or at least 1/100th. If you can tell me the weight capacity if your axle that may help to narrow things down too.

Reply below with that info and I am happy to look into it.

expert reply by: Jesse M

Gord E.

4/23/2025

Hi I know I told my axle size is 24mm If we went that size the one you suggested Will rub on axle? When I measure old seal It measures 24.5 mm housing measurements 46.5mm

Jesse M.

4/23/2025

@GordE Sorry but we do not have a seal with a 24.5mm ID/46.5mm OD. The closest thing we have would be a 1" ID/1.78" OD seal like part # CE16305A. This would not be a suitable replacement for your seal though. What kind of trailer is this for?

Gord E.

4/23/2025

Hi I found some thanks

Gord E.

4/23/2025

Hi again I was just crunching some numbers I D is good but the 46.5mm housing In inches it should be 1.8307———-