Are The Threaded Fittings On The B&B RV Fresh Water Fill Diverter Valve BM35RR Bonded Together?
Updated 10/27/2025 | Published 03/21/2025
Question:
Can the outlet and inlet elbows be unthreaded so new fittings can be threaded in? I really need to be able to unscrew the existing threaded fittings so I can simply screw back in the factory customized hose configuration. I have seen some of these whose threads are glued/bonded and cannot be unthreaded. Thank you.
asked by: Dan A
(click to enlarge)
Expert Reply:
Hello Dan, thanks for reaching out. You asked a good question so I went out to our warehouse and got my hands on the B&B RV Fresh Water Fill Diverter Valve and Plate Assembly # BM35RR. The threaded fittings are not bonded together, and I was easily able to unscrew each one by hand. Take a look at the picture I took for you and included below.
I hope this helps. Feel free to leave a reply below with any questions or comments and I am happy to get back to you.
(click to enlarge)
Product Page this Question was Asked From
B&B RV Fresh Water Fill Diverter Valve and Plate Assembly - Blue
- RV Fresh Water
- Water Fill
- Valves
- Plastic
- Diverter Valve
- 1/2 Inch MPT
- B and B Molders
more information >
Continue Researching
- Shop: B&B RV Fresh Water Fill Diverter Valve and Plate Assembly - Blue
- Search Results: diverter valve rv fresh water
- Search Results: wet bay
- Search Results: rv water pressure regulator
- Video: All About the B and B RV Fresh Water Fill Diverter Valve and Plate Assembly
- Video: Review of goblutech RV Water Pressure Regulator - Water Pressure Regulator - GB97FR
- Shop: Blu Technology RV Pressure Regulator - Stainless Steel - 160 PSI
- Search Results: battery cut off switch
- Q&A: Diverter Valve For Motorhome For City Water
- Search Results: check valve
- Search Results: diverter valve
- Shop: B&B RV Winterizing Diverter Valve and Plate Assembly - White
- Shop: Replacement Diverter Valve for B&B RV Water Centers - PEX Connections
- Search Results: progressive dynamics rv power converter
- Shop: Valterra Electrical Cable Hatch for RVs - 5-1/8" Diameter - White
- Shop: Replacement Diverter Valve Assembly for B&B Nautilus P4 Panel - 1/2" MPT
- Shop: B&B RV Water Center - City/Tank Fill - Tank Flush
- Shop: RV Plug Adapters
- Q&A: Breakers that Can be Used with Progressive Dynamics 4000 Series Inteli-Power Converter
- Video: Review of WFCO RV Power Converter - Converter Only - WF98FR
- Q&A: Need A Replacement City Water Hookup For A Nautilus System
- Q&A: What Does the 75 AMP Go Power RV Converter and Smart Battery Charger Plug Into?
- Q&A: Maximum Air Pressure of Dexstar 16 x 6 Trailer Wheel
- Q&A: Availability of Soft Start for Dometic FreshJet 5
- Video: An In-Depth Look at the B and B RV Winterizing Diverter Valve and Plate Assembly
- Video: B and B RV Hot Water Tank Bypass Diverter Valve and Plate Assembly Review
- Q&A: Recommended Replacement For A Dometic Brisk II Model # B59516
Jesse M.
10/27/2025
Hey Dan, how did things go with unthreading the fittings on your diverter valve? Were you able to reconnect your factory hose setup the way you wanted? Your update could make it easier for others working with the same valve.