Is There Longer Hitch Pin Lock that Can be Keyed Alike

Question

Question:

Can i order 5 of these locking pins keyed alike?

asked by: John

0

Expert Reply:

Hey John, so I have a similar option that can be keyed alike with the etrailer part # e98881 which has a span of 3-5/8 inches but the # 34061074-D doesn't have the ability to do that. Would the 3-5/8 inch span work for you?

expert reply by: Jameson C

0

Jameson C.

10/30/2025

Hey John, did the 3-5/8 inch span lock end up working for your setup? Knowing how it fit could help others looking for keyed-alike options for their hitches.

Answer 1

The total length of the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar #RM-677 from the center of the hitch pin hole to the center of the baseplate pin hole when connected to car is 52" when extended and in use and 40-1/2" when…

view full answer...

Answer 2

Yes, you can use the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers item #325-GH-1925 with your Blue Ox Apollo Non-Binding Tow Bar - 2-1/2" Hitch item #BX7470. However, it is not available without the 2-Ball mounts. This ball mount has a…

view full answer...

Answer 3

Yes, you can use the Equal-i-zer Weight Dist Shank #EQ90-02-4600 with a Reducer Sleeve #325-GH-007 on your 2022 Ram 2500. I do highly recommend using a Roadmaster Quiet Hitch #RM-062 to remove the excess play from the receiver to the hitch. Having…

view full answer...

Answer 4

I don't have a way to verify fit of the AMPLock Trailer Hitch Receiver Lock part #AMP37FR on a 2020 Toyota Tacoma but we can offer you this same pin with a longer usable span, the AMPLock Trailer Hitch Receiver Lock for 2-1/2" or 3"…

view full answer...

Answer 5

First you are going to have to get your corroded hitch pin out of your receiver and hitch. For this you will want to use some penetrating oil to try and break up as much of the corrosion as possible. A wrench can be used on the hitch pin to try and…

view full answer...

Answer 6

The only way to avoid using a reducer sleeve like the Curt #C45408 is to get a ball mount with a 3" shank and for that I recommend checking out the B&W Tow & Stow 3-Ball Mount #BWTS30049B which comes with the 3 common hitch ball sizes…

view full answer...

Answer 7

Hello Hal, Great question! It really would be nice if Toyota kept their receiver the same size as everyone else’s so any standard 2" lock would fit. The good news is that Infinite Rule actually made a lock specifically for the 2024+ Toyota…

view full answer...

Answer 8

To lock your B&W Tow & Stow 3-Ball Mount #BWTS30049B to your truck you actually only need one single locking hitch pin and for that I recommended checking out the InfiniteRule Hitch Lock #34061073-D which is a stainless steel construction.…

view full answer...

Answer 9

Yes, it will Mark. The InfiniteRule Hitch Lock for 2" Toyota Tacoma Hitches item #IR75FR has a longer span to accommodate the Toyota hitch receiver. Which they've recently started expanding to other vehicles besides the Tacoma. You will most…

view full answer...

Answer 10

Hey Charles, The Brophy #BH20 has a 13-1/4" from center of hitch pin hole to center of ball hole, which is a bit more than the B&W Tow & Stow ballmounts have so the closest option is going to be the B&W Tow & Stow 2-Ball Mount…

view full answer...

Answer 11

Hey William, so the 3 inch hitches do use the larger hitch pin diameter but the 2-1/2 inch hitches still use the smaller one. So with a reducer like the part #38735 technically you would use both sizes. If you check out the picture I attached you can…

view full answer...

Answer 12

For the 3 inch hitch of your 2021 Ford F-350 to determine if you need the 4-1/2 inch drop Tow and Stow part #BWTS30048B or the 7-1/2 inch drop part #BWTS30049B will be based largely on the trailers you plan to tow and how tall the coupler sits from…

view full answer...