Replacement Hanger Kit and EZ Flex Equalizers for Trailer with Tandem Dexter EZ Flex
Updated 11/17/2025 | Published 12/03/2024
Products Featured in This Question
Question:
I have a Dexter D52 tandem ez flex axle TT that I want to replace the 3 inch hangers and also install a new ez flex rebuild kit. The front and rear hangers measure 5 1/2 to center hole 9/16 bolt. The center hangers measure 4 1/2 to center hole. Axle spacing is 32 inch. Do you offer a hanger kit with these dimensions as well as ez flex kit with wet bolts.
asked by: Fred S
Expert Reply:
Hey Fred, the closest kit we have to the hangers you have now would be the part # APT4 which comes with hangers that are 3-1/4 inch front and rear and 5-7/16 inch for center. Then for EZ Flex equalizers to swap out what comes with that you'd want the part # K71-654-00.
Then for wet bolts you'd want the part # 126B2 and you'd be set.
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 5-7/16" Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- Redline
more information >
Continue Researching
- Q&A: Does Roadmaster Make the Long U-Bolt Kit part # RM33KT
- Q&A: Custom Mount Hitch For a 2025 Ram 2500 Diesel Model
- Q&A: Can Brake Drum Be Added To etrailer e37YR 2K Axle With Idler Hubs?
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Correct Hanger Spacing for the Tandem-Axle Trailer Hanger Kit Part # APT4
- Q&A: How to Determine the Distance for Mounting Trailer Spring Hangers on a Single Axle Trailer
- Q&A: Tandem Axle Hanger Spacing for Double Eye Springs 25-1/2 Inches
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
Jameson C.
11/17/2025
Hey Fred, how did the setup go with the APT4 hanger kit and the EZ Flex kit you picked out? Your feedback could really help others trying to match similar hanger dimensions.